Tegiwa Coilover Suspension Shock Socks Covers 300mm

Neoprene Covers That Keep Salt and Grit Off Your Dampers

A set of four Tegiwa coilover socks in the 300mm length. They wrap around the damper body and lower spring seat to keep water, road salt and grit away from the shock body and the threaded ride height collars, which are the first parts to suffer on a coilover that lives outside all year.

Each sock is cut from neoprene with a heavy-duty Velcro closure running its full length, so it goes on with the coilovers still fitted to the car and comes off again in seconds when you want to adjust the ride height or clean up. They suit most coilover designs, including BC Racing, MeisterR, HSD and Racing Logic kits, and are also available in a 350mm length and a mixed set of two 300mm and two 350mm for cars with different front and rear damper lengths.

Key Features

• Neoprene construction that is flexible and water resistant
• Heavy-duty Velcro closure along the full length of the sock
• Keeps water, salt and grit off the damper body and adjuster threads
• Fits with the coilovers on the car, nothing needs to be removed
• Peels back for ride height adjustment, then refits in seconds
• Black finish that sits discreetly behind the wheel
• Set of four to cover all four corners

What's in the Box?

• 4 x Tegiwa neoprene coilover socks, 300mm long

Fitment

Universal fit for most coilover kits, including BC Racing, MeisterR, HSD and Racing Logic. Measure the length of damper body you want to cover, from just below the lower spring seat to the lower mount, and choose this 300mm sock if that measurement is 300mm or less. For longer bodies choose the 350mm sock, or the mixed set if the front and rear dampers differ.

Not suitable for: coilovers with a damper body longer than 300mm, which need the 350mm version.

Installation

Clean the damper body and threads and let them dry. For the best protection, treat the metal with ACF-50 anti-corrosion spray first and wipe off any excess. Wrap the sock around the damper body with the Velcro seam facing away from the tyre, press the closure together firmly along its full length, and check that the sock cannot touch the tyre, brake lines or anti-roll bar link at full lock and full compression. Peel the sock back whenever you adjust the ride height and refit it afterwards.

Which length do I need, 300mm or 350mm?

Measure the exposed damper body below the spring. If it is 300mm or shorter, this sock is the one. Longer bodies, which are common on rear dampers and taller cars, need the 350mm version, and the mixed set covers cars with a different length front and rear.

Will they fit my coilovers?

They fit most coilovers, including BC Racing, MeisterR, HSD and Racing Logic. The Velcro closure gives plenty of adjustment around the body, so damper diameter is rarely a problem. If you have an unusual design, such as a reservoir mounted on the damper body, contact us before ordering.

Do I need to remove the coilovers to fit them?

No. The full-length Velcro closure means they wrap around the damper with the coilover still on the car. Turning the steering to full lock gives you room to work on the fronts.

Can I still adjust ride height with the socks on?

Yes. Peel the sock back to get at the locking collars, make your adjustment and refit the sock. Nothing needs to be unbolted.

Do the socks trap moisture against the damper?

Neoprene keeps the worst of the spray, salt and grit off, but no cover is completely sealed. Treat the damper with ACF-50 before fitting the socks, and take them off for a check and a wipe down every few months, particularly after winter.

Is this a full set for the car?

Yes. You get four socks, one for each coilover.