MeisterR ClubRace GT1 Coilovers Mazda MX5 NC 05-15

MeisterR ClubRace GT1 Coilovers for Mazda MX5 NC (2005-2015) – Track-Focused SDV Suspension, Built to Order

MeisterR ClubRace GT1 coilovers replace the standard dampers and springs on the Mazda MX5 NC (2005-2015) with a height adjustable setup designed for track-focused cars that still need a compliant ride. Ride height and spring preload adjust independently, so you can set the height without changing how the spring is loaded.

The ClubRace GT1 uses MeisterR's Staggered Digressive Valve (SDV), tuned so the damper absorbs big hits such as kerbs and rumble strips while keeping steering response, traction and chassis control. Each kit is built to order and set up for your intended use.

Specifications

• Damping: 32-stage, compression and rebound combined
• Valve technology: Staggered Digressive Valve (SDV)
• Warranty: 2 year limited warranty

Key Features

• Staggered Digressive Valve (SDV) technology tuned for kerbs and rumble strips
• 32-stage damping adjustment (compression and rebound combined)
• Independent ride height and spring preload adjustment
• Custom built to order for your intended use
• Bump stops and rubber boots included

What's in the Kit?

• 2 x front coilovers with springs
• 2 x rear coilovers or dampers with springs
• Bump stops and rubber dust boots

Fitment

• Mazda MX5 NC (2005-2015)

Not suitable for: other models or chassis codes not listed above. Please check your chassis code and years before ordering.

Installation

The kit bolts in place of the standard suspension. Set the ride height and spring preload, tighten everything to the correct torque, let the suspension settle, then recheck the height and have a four-wheel alignment carried out. We recommend professional fitting.

Please note: Typical build time of 4 – 6 weeks, please enquire when ordering.

Upgrade Further

Other MeisterR options for this car: MeisterR GT1 Coilovers Mazda MX5 NC 05-15; MeisterR ZetaRace Coilovers Mazda MX5 NC 05-15; MeisterR ZetaSport Coilovers Mazda MX5 NC 05-15; MeisterR Sportive Coilovers Mazda MX5 NC 05-15; MeisterR Sport-Z Coilovers Mazda MX5 NC 05-15.

Can I adjust the ride height?

Yes. Ride height and spring preload adjust independently, so you can set the height without changing spring preload.

How is the damping adjusted?

A single adjuster on each damper gives 32 stages, with compression and rebound adjusted together. Start in the middle and adjust in small steps.

Are these suitable for daily driving?

Yes. They can be used on the road, but they are set up mainly for track-focused cars, so expect a firmer ride than our road-focused kits.

Do I need a wheel alignment after fitting?

Yes. Changing the ride height alters the suspension geometry, so a four-wheel alignment should be carried out once the car has settled.

Why does the GT1 take longer to arrive?

GT1 kits are custom built to order and set up for how you will use the car. Typical build time of 4 – 6 weeks, please enquire when ordering.

Which MeisterR kit is right for my car?

Choose a road-focused kit such as the ZetaCRD or ZetaSport for mostly road use, and the ClubRace, ZetaRace or GT1 range for track-focused cars. Contact us if you would like help choosing.

What warranty is included?

MeisterR covers this kit with a 2 year limited warranty against defects in materials and workmanship.

Will it fit my car?

This kit is for the Mazda MX5 NC (2005-2015). If you are not sure, contact us with your registration or chassis number and we will confirm before you order.