YSR Dynamic Pro Drift Coilovers Mitsubishi Lancer Evolution VI 99-00

YSR Dynamic Pro Drift Coilovers for Mitsubishi Lancer Evolution VI (1999-2000) – Drift Coilovers Developed with D1 Drivers, 33-Way Adjustable

Yellow Speed Racing Dynamic Pro Drift coilovers for the Mitsubishi Lancer Evolution VI (1999-2000). They are built for controlled slides and drift competition.

They were developed for Yellow Speed Racing by drivers from Japan's Nichiei Racing Team, including four-time D1 champion Yoichi Imamura, and are still tested with YSR's sponsored professional drivers.

Spring rates and valving are matched specifically for drifting, with reinforced lower mounts and helper springs where applicable. MacPherson strut cars get inverted monotube dampers to keep brake heat away from the damper oil, resist side loads and reduce unsprung weight, and cars with rear wishbones get a thickened 20mm rear damper shaft. Damping is adjustable through 33 levels.

Specifications

• Damping: 33-level adjustable (compression and rebound together)
• Damper: Inverted monotube on MacPherson strut cars, 55mm zinc-plated steel body
• Use: Drift and competition
• Spring rates: 8kg/mm front, 7kg/mm rear
• Front upper mount: Aluminium pillow ball upper mount with camber plate
• Rear upper mount: Aluminium pillow ball upper mount
• Front strut: Inverted strut
• Rear strut: Standard strut

Key Features

• Developed with D1 champion Yoichi Imamura and Nichiei Racing
• Drift-specific spring rates and matched valving
• 33-level adjustable damping
• Inverted monotube dampers on MacPherson strut cars
• Reinforced lower mounts
• Helper springs where applicable
• 20mm rear damper shaft on rear wishbone cars
• Front pillow ball mounts with camber adjustment

What's in the Kit?

• 2 x front coilovers with springs and top mounts (aluminium pillow ball upper mount with camber plate)
• 2 x rear dampers and springs, plus top mounts (aluminium pillow ball upper mount)
• Helper springs (where applicable)

Fitment

• Mitsubishi Lancer Evolution VI (1999-2000)

Not suitable for: models or versions not listed above. Please check your model, drive type and strut size before ordering.

Installation

The coilovers replace the standard dampers and springs. Set the ride height and spring preload, let the suspension settle, then recheck the height and have a four-wheel alignment carried out. We recommend professional fitting.

Please note: Pillow ball upper mounts make a small amount of noise. This is normal and does not affect performance or safety. Yellow Speed Racing also offer hardened rubber upper mounts (R/U) for quieter running.

Upgrade Further

Other Yellow Speed Racing coilovers for this car: YSR Club Performance 2-Way Coilovers Mitsubishi Lancer Evolution VI 99-00; YSR Dynamic Pro Sport Coilovers Mitsubishi Lancer Evolution VI 99-00; YSR Dynamic Pro Sport Inverted Coilovers Mitsubishi Lancer Evolution VI 99-00; YSR Premium Competition Coilovers Mitsubishi Lancer Evolution VI 99-00; YSR Dynamic Pro Gravel Rally 1-Way Coilovers Mitsubishi Lancer Evolution VI 99-00.

Who developed these coilovers?

They were developed with drivers from Japan's Nichiei Racing Team, including four-time D1 champion Yoichi Imamura.

How is the damping adjusted?

Each damper has a 33-level adjuster that sets compression and rebound together.

Can I use them on the road?

They are set up for drifting and competition, so expect a firm ride on the road.

Can I adjust the ride height without changing preload?

Yes. Ride height is set by winding the lower bracket up or down, so spring preload and damper travel stay the same.

Will the pillow ball mounts be noisy?

They make a small amount of noise, which is normal. Hardened rubber upper mounts (R/U) are available for quieter running.

Do I need a wheel alignment after fitting?

Yes. Changing the ride height alters the suspension geometry, so a four-wheel alignment should be carried out once the car has settled.

What warranty is included?

Yellow Speed Racing cover Dynamic Pro Drift coilovers with a 3 month limited warranty against defects in materials and workmanship.