YSR Dynamic Pro Drift Coilovers BMW 3-Series E36 94-01 - Rear Shock & Spring In One Unit

YSR Dynamic Pro Drift Coilovers for BMW 3-Series E36 (1994-2001) – Drift Coilovers Developed with D1 Drivers, 33-Way Adjustable

Yellow Speed Racing Dynamic Pro Drift coilovers for the BMW 3-Series E36 (1994-2001). They are built for controlled slides and drift competition. This listing is for the Rear Shock & Spring In One Unit version.

They were developed for Yellow Speed Racing by drivers from Japan's Nichiei Racing Team, including four-time D1 champion Yoichi Imamura, and are still tested with YSR's sponsored professional drivers.

Spring rates and valving are matched specifically for drifting, with reinforced lower mounts and helper springs where applicable. MacPherson strut cars get inverted monotube dampers to keep brake heat away from the damper oil, resist side loads and reduce unsprung weight, and cars with rear wishbones get a thickened 20mm rear damper shaft. Damping is adjustable through 33 levels.

Specifications

• Damping: 33-level adjustable (compression and rebound together)
• Damper: Inverted monotube on MacPherson strut cars, 55mm zinc-plated steel body
• Use: Drift and competition

Key Features

• Developed with D1 champion Yoichi Imamura and Nichiei Racing
• Drift-specific spring rates and matched valving
• 33-level adjustable damping
• Inverted monotube dampers on MacPherson strut cars
• Reinforced lower mounts
• Helper springs where applicable
• 20mm rear damper shaft on rear wishbone cars

What's in the Kit?

• 2 x front coilovers with springs
• 2 x rear dampers and springs
• Helper springs (where applicable)

Fitment

• BMW 3-Series E36 (1994-2001) – Rear Shock & Spring In One Unit

Not suitable for: models or versions not listed above. Other Dynamic Pro Drift versions for this car: YSR Dynamic Pro Drift Coilovers BMW 3-Series E36 92-98 Rear Shock & Spring In One Unit; YSR Dynamic Pro Drift Coilovers BMW 3-Series E36 94-01 - Rear Shock & Spring In One Unit - CLEARANCE SALE.

Installation

The coilovers replace the standard dampers and springs. Set the ride height and spring preload, let the suspension settle, then recheck the height and have a four-wheel alignment carried out. We recommend professional fitting.

Upgrade Further

Other Yellow Speed Racing coilovers for this car: YSR Club Performance 2-Way Coilovers BMW 3-Series E36 92-98 Rear Shock & Spring Separate; YSR Dynamic Pro Sport Coilovers BMW 3-Series E36 92-98 Rear Shock & Spring In One Unit; YSR Dynamic Pro Sport Inverted Coilovers BMW 3-Series E36 92-98 Rear Shock & Spring Separate; YSR Premium Competition Coilovers BMW 3-Series E36 92-98 Rear Shock & Spring In One Unit; YSR Dynamic Pro Gravel Rally 1-Way Coilovers BMW 3-Series E36 94-01 - Rear Shock & Spring In One Unit.

Who developed these coilovers?

They were developed with drivers from Japan's Nichiei Racing Team, including four-time D1 champion Yoichi Imamura.

How is the damping adjusted?

Each damper has a 33-level adjuster that sets compression and rebound together.

Can I use them on the road?

They are set up for drifting and competition, so expect a firm ride on the road.

Can I adjust the ride height without changing preload?

Yes. Ride height is set by winding the lower bracket up or down, so spring preload and damper travel stay the same.

Do I need a wheel alignment after fitting?

Yes. Changing the ride height alters the suspension geometry, so a four-wheel alignment should be carried out once the car has settled.

What warranty is included?

Yellow Speed Racing cover Dynamic Pro Drift coilovers with a 3 month limited warranty against defects in materials and workmanship.