MeisterR ZetaCRD Coilovers Subaru WRX GJ GP 11+

MeisterR ZetaCRD Coilovers for Subaru WRX GJ GP (2011 on) – Digressive CRD Damping for Road and Track

MeisterR ZetaCRD coilovers replace the standard dampers and springs on the Subaru WRX GJ GP (2011 on) with a height adjustable setup designed for road driving and occasional track days, with the focus on ride compliance. Ride height and spring preload adjust independently, so you can set the height without changing how the spring is loaded.

The ZetaCRD uses digressive damping with MeisterR's Close Ratio Damping (CRD) technology. It keeps the ride composed over broken road surfaces while giving good body control when you take the car on track.

Specifications

• Damping: 32-stage, compression and rebound combined
• Valve technology: Close Ratio Damping (CRD), digressive
• Spring rates: 7kg/mm front, 8kg/mm rear
• Front top mount: Aluminium with spherical bearing and camber adjustment
• Rear top mount: Press steel with rubber insulation
• Warranty: 1 year limited warranty

Key Features

• Digressive damping with Close Ratio Damping (CRD) technology
• 32-stage damping adjustment (compression and rebound combined)
• Independent ride height and spring preload adjustment
• Tuned for ride compliance on the road
• Bump stops and rubber boots included

What's in the Kit?

• 2 x front coilovers with springs and top mounts (aluminium with spherical bearing and camber adjustment)
• 2 x rear coilovers or dampers with springs and top mounts (press steel with rubber insulation)
• Bump stops and rubber dust boots

Fitment

• Subaru WRX GJ GP (2011 on)

Not suitable for: other models or chassis codes not listed above. Please check your chassis code and years before ordering.

Installation

The kit bolts in place of the standard suspension. Set the ride height and spring preload, tighten everything to the correct torque, let the suspension settle, then recheck the height and have a four-wheel alignment carried out. We recommend professional fitting.

Upgrade Further

Other MeisterR options for this car: MeisterR GT1 Coilovers Subaru WRX GJ GP 11+.

Can I adjust the ride height?

Yes. Ride height and spring preload adjust independently, so you can set the height without changing spring preload.

How is the damping adjusted?

A single adjuster on each damper gives 32 stages, with compression and rebound adjusted together. Start in the middle and adjust in small steps.

Are these suitable for daily driving?

Yes. They are designed with road use in mind and give a compliant ride with sharper handling than standard.

Do I need a wheel alignment after fitting?

Yes. Changing the ride height alters the suspension geometry, so a four-wheel alignment should be carried out once the car has settled.

Which MeisterR kit is right for my car?

Choose a road-focused kit such as the ZetaCRD or ZetaSport for mostly road use, and the ClubRace, ZetaRace or GT1 range for track-focused cars. Contact us if you would like help choosing.

What warranty is included?

MeisterR covers this kit with a 1 year limited warranty against defects in materials and workmanship.

Will it fit my car?

This kit is for the Subaru WRX GJ GP (2011 on). If you are not sure, contact us with your registration or chassis number and we will confirm before you order.