MeisterR GT1 Coilovers Nissan Skyline R33 R34 GTR BCNR33 98-02

MeisterR GT1 Coilovers for Nissan Skyline R33 R34 GTR BCNR33 (1998-2002) – Race-Proven Road and Track Suspension, Built to Order

MeisterR GT1 coilovers replace the standard dampers and springs on the Nissan Skyline R33 R34 GTR BCNR33 (1998-2002) with a height adjustable setup designed for fast road and track use. Ride height and spring preload adjust independently, so you can set the height without changing how the spring is loaded.

Every GT1 kit uses MeisterR's Staggered Digressive Valve (SDV). It gives a digressive damping curve on both compression and rebound, so the damper soaks up uneven surfaces while keeping turn-in sharp and the chassis well controlled. Each kit is built to order and set up for your intended use.

Specifications

• Damping: 32-stage, compression and rebound combined
• Valve technology: Staggered Digressive Valve (SDV)
• Warranty: 2 year limited warranty

Key Features

• Staggered Digressive Valve (SDV) technology on compression and rebound
• 32-stage damping adjustment (compression and rebound combined)
• Independent ride height and spring preload adjustment
• Custom built to order for your intended use
• Bump stops and rubber boots included

What's in the Kit?

• 2 x front coilovers with springs
• 2 x rear coilovers or dampers with springs
• Bump stops and rubber dust boots

Fitment

• Nissan Skyline R33 R34 GTR BCNR33 (1998-2002)

Not suitable for: other models or chassis codes not listed above. Please check your chassis code and years before ordering.

Installation

The kit bolts in place of the standard suspension. Set the ride height and spring preload, tighten everything to the correct torque, let the suspension settle, then recheck the height and have a four-wheel alignment carried out. We recommend professional fitting.

Please note: Typical build time of 4 – 6 weeks, please enquire when ordering.

Upgrade Further

Other MeisterR options for this car: MeisterR ZetaSport Coilovers Nissan Skyline R33 R34 GTR BCNR33 98-02.

Can I adjust the ride height?

Yes. Ride height and spring preload adjust independently, so you can set the height without changing spring preload.

How is the damping adjusted?

A single adjuster on each damper gives 32 stages, with compression and rebound adjusted together. Start in the middle and adjust in small steps.

Are these suitable for daily driving?

Yes. They are designed with road use in mind and give a compliant ride with sharper handling than standard.

Do I need a wheel alignment after fitting?

Yes. Changing the ride height alters the suspension geometry, so a four-wheel alignment should be carried out once the car has settled.

Why does the GT1 take longer to arrive?

GT1 kits are custom built to order and set up for how you will use the car. Typical build time of 4 – 6 weeks, please enquire when ordering.

Which MeisterR kit is right for my car?

Choose a road-focused kit such as the ZetaCRD or ZetaSport for mostly road use, and the ClubRace, ZetaRace or GT1 range for track-focused cars. Contact us if you would like help choosing.

What warranty is included?

MeisterR covers this kit with a 2 year limited warranty against defects in materials and workmanship.

Will it fit my car?

This kit is for the Nissan Skyline R33 R34 GTR BCNR33 (1998-2002). If you are not sure, contact us with your registration or chassis number and we will confirm before you order.