{"product_id":"tein-street-advance-z-coilovers-toyota-soarer-jzz30-91-00","title":"Tein Street Advance Z Coilovers Toyota Soarer JZZ30 91-00","description":"\u003ch2\u003eTEIN Street Advance Z Coilovers for Toyota Soarer JZZ30 (1991-2000) – Adjustable Ride Height, 16-Way Damping\u003c\/h2\u003e\n\u003cp\u003eTEIN Street Advance Z replaces the original dampers and springs on your Toyota Soarer JZZ30 with a height-adjustable coilover kit, so you can set the stance you want and tighten up the handling without making the car uncomfortable. TEIN specifies 12 kgf\/mm front and 7 kgf\/mm rear spring rates for this application.\u003c\/p\u003e\n\u003cp\u003eStreet Advance Z uses a sealed twin-tube damper with a threaded body. Ride height is set by moving the lower spring seat up or down the thread, and a 16-level adjuster on top of the damper lets you fine-tune the ride from comfortable to firmer for spirited driving. Your original top mounts are reused, which keeps the kit affordable and the cabin free from extra noise.\u003c\/p\u003e\n\u003cp\u003eThe damper bodies get TEIN's two-layer powder coat, and the height-adjustment threads are protected by TEIN's low-friction ZTP coating, which resists rust and stone chips and helps stop the spring seats seizing. TEIN springs are cold-formed from SAE9254 spring steel and powder coated, and TEIN designs them to resist sagging over time.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamper type:\u003c\/strong\u003e Twin-tube, gas and oil\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight adjustment:\u003c\/strong\u003e Threaded spring seat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping adjustment:\u003c\/strong\u003e 16 levels (compression and rebound together)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring rate, front:\u003c\/strong\u003e 12 kgf\/mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring rate, rear:\u003c\/strong\u003e 7 kgf\/mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRide height as supplied, front:\u003c\/strong\u003e approx. 20 mm lower than standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRide height as supplied, rear:\u003c\/strong\u003e approx. 30 mm lower than standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTEIN recommended height range, front:\u003c\/strong\u003e 10 to 30 mm below standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTEIN recommended height range, rear:\u003c\/strong\u003e 24 to 40 mm below standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEDFC motor kit:\u003c\/strong\u003e EDK05-12120 (sold separately)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTop mounts:\u003c\/strong\u003e Reuses your original top mounts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e GST60-91SS2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSpring rates and ride heights are TEIN's application data. Heights are measured against the car's standard ride height and are a guide only: the result on your car depends on its condition, wheels and tyres, and load.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHeight adjustable via a threaded lower spring seat\u003c\/li\u003e\n\u003cli\u003e16-level damping adjuster, changing compression and rebound together (0 = stiffest, 16 = softest)\u003c\/li\u003e\n\u003cli\u003eSealed twin-tube dampers tuned for everyday road comfort\u003c\/li\u003e\n\u003cli\u003eCompatible with TEIN EDFC electronic damping controllers using motor kit EDK05-12120 (sold separately)\u003c\/li\u003e\n\u003cli\u003eTEIN SAE9254 springs matched to the car, powder coated and designed to resist sagging\u003c\/li\u003e\n\u003cli\u003eReuses the original top mounts for a quiet, refined ride\u003c\/li\u003e\n\u003cli\u003eZTP-coated threads and TEIN-green powder coat to fight rust and seized spring seats\u003c\/li\u003e\n\u003cli\u003eAn affordable way into adjustable TEIN suspension\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e4 x Street Advance Z dampers\u003c\/li\u003e\n\u003cli\u003e4 x TEIN coil springs\u003c\/li\u003e\n\u003cli\u003eSpring seats and lock rings\u003c\/li\u003e\n\u003cli\u003eHook spanners for setting ride height\u003c\/li\u003e\n\u003cli\u003eFitting instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKit notes from TEIN:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCars with TEMS need the original top mounts from a non-TEMS car to fit this kit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e image for reference only.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eToyota Soarer JZZ30 (May 1991 to Mar 2000), 2.5GT-t, 2.5L RWD\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTEIN also lists this kit (GST60-91SS2) for: Lexus SC300 JZZ30 (1992-2000); Lexus SC400 UZZ30 (1992-2000); Toyota Supra JZA80 JZA80L (1993-2002).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e other Toyota Soarer generations, body styles or drivetrains not listed above, as they use different TEIN part numbers. If your exact model isn't listed, contact us with your registration before ordering.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe kit replaces the original dampers and springs. Ride height is set by winding the lower spring seat up or down the threaded body with the supplied spanners and locking it with the second ring. Your original top mounts are reused, so check their condition and replace any that are worn before fitting. Tighten the top nut with a torque wrench while holding the piston rod on its flats; over-tightening can damage the adjuster. Leave suspension arm bolts loose until the car is back on its wheels, then torque them at normal ride height so the bushes aren't preloaded. TEIN advises lowering by no more than 30-40 mm to start with, keeping the front level with or 5-10 mm lower than the rear. Let the springs settle for a few days, recheck the height and lock rings, then have a full four-wheel alignment done. Fitting needs spring compressors (where strut assemblies are rebuilt), a torque wrench and a good understanding of the car's suspension. We recommend professional fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle-specific notes from TEIN:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront and rear: use with the original bump stops and dust boots.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cp\u003eLowering changes the anti-roll bar geometry. TEIN's adjustable drop links let you correct it: \u003ca href=\"\/products\/tein-front-adjustable-drop-link-rods-toyota-soarer-jzz30\"\u003eTein Front Adjustable Drop Links Toyota Soarer JZZ30\u003c\/a\u003e. Add a TEIN EDFC5 controller with motor kit EDK05-12120 to adjust damping from the driver's seat. Contact us for pricing.\u003c\/p\u003e\n\u003ch3\u003eWill this kit fit my Toyota Soarer JZZ30?\u003c\/h3\u003e\n\u003cp\u003eThis kit (TEIN part GST60-91SS2) is listed for the models in the Fitment section above. Check your chassis code, year and trim against that list, along with any notes under it. If you're unsure, send us your registration or VIN before ordering and we'll confirm.\u003c\/p\u003e\n\u003ch3\u003eHow low will my Toyota Soarer JZZ30 go?\u003c\/h3\u003e\n\u003cp\u003eAs supplied, TEIN's data puts the car approx. 20 mm lower than standard at the front and approx. 30 mm lower than standard at the rear. TEIN recommends staying within 10 to 30 mm below standard at the front and 24 to 40 mm below standard at the rear. Wheels, tyres and the car's condition all affect the final height.\u003c\/p\u003e\n\u003ch3\u003eCan I adjust the damping?\u003c\/h3\u003e\n\u003cp\u003eYes. The 16-level adjuster changes compression and rebound together: 0 is the stiffest setting and 16 the softest. Start from TEIN's recommended setting and change it a few clicks at a time.\u003c\/p\u003e\n\u003ch3\u003eDoes it work with TEIN EDFC?\u003c\/h3\u003e\n\u003cp\u003eYes. You'll need TEIN's EDFC5 controller kit plus motor kit EDK05-12120 for this car, both sold separately. EDFC lets you change damping from inside the car.\u003c\/p\u003e\n\u003ch3\u003eDo I need my original top mounts?\u003c\/h3\u003e\n\u003cp\u003eYes. This kit reuses your original top mounts, so they aren't included. If they're worn or noisy, replace them at the same time.\u003c\/p\u003e\n\u003ch3\u003eDo I need a wheel alignment after fitting?\u003c\/h3\u003e\n\u003cp\u003eYes. Changing ride height alters camber and toe, so have a full four-wheel alignment done once the springs have settled and the height is final.\u003c\/p\u003e\n\u003ch3\u003eAre TEIN coilovers road legal in the UK?\u003c\/h3\u003e\n\u003cp\u003eCoilovers can be used on UK roads as long as the car stays roadworthy: keep a sensible ride height, enough clearance and correctly aimed headlights. Modifying your suspension should be declared to your insurer.\u003c\/p\u003e\n\u003ch3\u003eWhat's the difference between Street Advance Z and Street Basis Z?\u003c\/h3\u003e\n\u003cp\u003eBoth use the same twin-tube damper and threaded height adjustment. Street Advance Z adds a 16-level damping adjuster, while Street Basis Z has fixed damping set by TEIN.\u003c\/p\u003e\n\u003ch3\u003eWhat warranty do TEIN coilovers come with?\u003c\/h3\u003e\n\u003cp\u003eTEIN UK covers its suspension for 12 months from the date of purchase against defects in materials and workmanship. Keep your invoice, as it's needed for any claim.\u003c\/p\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":58920636350847,"sku":"GST60-91SS2-4","price":615.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6251\/6693\/files\/TeinStreetAdvanceZ-1_5ff6745f-2634-45ea-ad9b-dcd174b634ec.jpg?v=1792773392","url":"https:\/\/coilovers.co.uk\/products\/tein-street-advance-z-coilovers-toyota-soarer-jzz30-91-00","provider":"Coilovers.co.uk","version":"1.0","type":"link"}