{"product_id":"tein-fs2-coilovers-tesla-model-3-long-range-17","title":"Tein FS2 Coilovers Tesla Model 3 Long Range 17+","description":"\u003ch2\u003eTEIN FS2 Coilovers for Tesla Model 3 Long Range (Vehicles Produced In China) (2017 on) – 2-Way Adjustable, Fast Road Focused\u003c\/h2\u003e\n\u003cp\u003eTEIN FS2 replaces the original dampers and springs on your Tesla Model 3 Long Range (Vehicles Produced In China) with a height-adjustable coilover kit, so you can set the stance you want and tighten up the handling without making the car uncomfortable. TEIN specifies 13 kgf\/mm front and 13 kgf\/mm rear spring rates for this application.\u003c\/p\u003e\n\u003cp\u003eFS2 is a 2-way adjustable coilover aimed at fast road and winding-road driving. Alongside the usual 16-level adjuster (compression and rebound together) there's a second 16-level compression adjuster, so you can fine-tune how the car reacts to bumps separately from its overall firmness. The twin-tube dampers use a separate reservoir and TEIN's Hydraulic Bump Stopper (H.B.S.).\u003c\/p\u003e\n\u003cp\u003eThe damper bodies get TEIN's two-layer powder coat, and the height-adjustment threads are protected by TEIN's low-friction ZTP coating, which resists rust and stone chips and helps stop the spring seats seizing. TEIN springs are cold-formed from SAE9254 spring steel and powder coated, and TEIN designs them to resist sagging over time.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamper type:\u003c\/strong\u003e Twin-tube with separate reservoir, with H.B.S.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight adjustment:\u003c\/strong\u003e Threaded spring seat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping adjustment:\u003c\/strong\u003e 2-way: 16 levels combined plus 16 levels compression\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring rate, front:\u003c\/strong\u003e 13 kgf\/mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring rate, rear:\u003c\/strong\u003e 13 kgf\/mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRide height as supplied, front:\u003c\/strong\u003e approx. 25-35 mm lower than standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRide height as supplied, rear:\u003c\/strong\u003e approx. 25-40 mm lower than standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTEIN recommended height range, front:\u003c\/strong\u003e 15 to 40 mm below standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTEIN recommended height range, rear:\u003c\/strong\u003e 15 to 50 mm below standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEDFC motor kit:\u003c\/strong\u003e EDK05-12120 (sold separately)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTop mounts:\u003c\/strong\u003e Vehicle-specific top mounts included (rubber or pillow-ball)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e VSGP4-N1AA3\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSpring rates and ride heights are TEIN's application data. Heights are measured against the car's standard ride height and are a guide only: the result on your car depends on its condition, wheels and tyres, and load. Standard ride height and ride height drop may vary by model year and trim level.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2-way adjustment: 16-level combined adjuster plus a separate 16-level compression adjuster\u003c\/li\u003e\n\u003cli\u003eTwin-tube dampers with a separate reservoir\u003c\/li\u003e\n\u003cli\u003eHeight adjustable via a threaded lower spring seat\u003c\/li\u003e\n\u003cli\u003eCompatible with TEIN EDFC electronic damping controllers using motor kit EDK05-12120 (sold separately)\u003c\/li\u003e\n\u003cli\u003eHydraulic Bump Stopper (H.B.S.) softens full-compression hits\u003c\/li\u003e\n\u003cli\u003eVehicle-specific top mounts included; camber-adjustable mounts on some cars\u003c\/li\u003e\n\u003cli\u003eTEIN SAE9254 springs matched to the car, powder coated and designed to resist sagging\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e4 x FS2 dampers\u003c\/li\u003e\n\u003cli\u003e4 x TEIN coil springs\u003c\/li\u003e\n\u003cli\u003eTop mounts (vehicle-specific)\u003c\/li\u003e\n\u003cli\u003eSpring seats and lock rings\u003c\/li\u003e\n\u003cli\u003eFitting instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e image for reference only.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTesla Model 3 (2017 on), Performance (excl. China-built vehicles), AWD\u003c\/li\u003e\n\u003cli\u003eTesla Model 3 (2017 to 2021), Long Range (China-built vehicles), AWD\u003c\/li\u003e\n\u003cli\u003eTesla Model 3 (2017 to 2023), Performance \/ Long Range, AWD\u003c\/li\u003e\n\u003cli\u003eTesla Model 3 (2021 on), Performance (China-built vehicles), AWD\u003c\/li\u003e\n\u003cli\u003eTesla Model 3 3L23T (Mar 2022 to Aug 2023), Long Range, AWD\u003c\/li\u003e\n\u003cli\u003eTesla Model 3 (2024 on), Performance \/ Long Range, AWD\u003c\/li\u003e\n\u003cli\u003eTesla Model Y (2020 to 2025), Long Range \/ Performance, AWD\u003c\/li\u003e\n\u003cli\u003eTesla Model Y (2021 on), Long Range (China-built vehicles), AWD\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTEIN also lists this kit (VSGP4-N1AA3) for: Tesla Model 3 3L23B (2021-2022).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e the Tesla Model 3, Model 3 3L13, Model Y (2017 on), which needs \u003ca href=\"\/products\/tein-fs2-coilovers-tesla-model-y-yl1yt-standard-range-22\"\u003eTEIN FS2 VSGP2-N1AA3\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe kit replaces the original dampers and springs. Ride height is set by winding the lower spring seat up or down the threaded body with the supplied spanners and locking it with the second ring. Tighten the top nut with a torque wrench while holding the piston rod on its flats; over-tightening can damage the adjuster. Leave suspension arm bolts loose until the car is back on its wheels, then torque them at normal ride height so the bushes aren't preloaded. TEIN advises lowering by no more than 30-40 mm to start with, keeping the front level with or 5-10 mm lower than the rear. Let the springs settle for a few days, recheck the height and lock rings, then have a full four-wheel alignment done. Fitting needs spring compressors (where strut assemblies are rebuilt), a torque wrench and a good understanding of the car's suspension. We recommend professional fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle-specific notes from TEIN:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRear: the interior trim must be cut or removed to avoid interference.\u003c\/li\u003e\n\u003cli\u003eRear: an EDFC controller is recommended, as the vehicle's construction makes it difficult to adjust damping force by hand.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cp\u003eAdd a TEIN EDFC5 controller with motor kit EDK05-12120 to adjust damping from the driver's seat. Contact us for pricing.\u003c\/p\u003e\n\u003ch3\u003eWill this kit fit my Tesla Model 3 Long Range (Vehicles Produced In China)?\u003c\/h3\u003e\n\u003cp\u003eThis kit (TEIN part VSGP4-N1AA3) is listed for the models in the Fitment section above. Check your chassis code, year and trim against that list, along with any notes under it. If you're unsure, send us your registration or VIN before ordering and we'll confirm.\u003c\/p\u003e\n\u003ch3\u003eHow low will my Tesla Model 3 Long Range (Vehicles Produced In China) go?\u003c\/h3\u003e\n\u003cp\u003eAs supplied, TEIN's data puts the car approx. 25-35 mm lower than standard at the front and approx. 25-40 mm lower than standard at the rear. TEIN recommends staying within 15 to 40 mm below standard at the front and 15 to 50 mm below standard at the rear. Wheels, tyres and the car's condition all affect the final height.\u003c\/p\u003e\n\u003ch3\u003eCan I adjust the damping?\u003c\/h3\u003e\n\u003cp\u003eYes. The 16-level adjuster changes compression and rebound together: 0 is the stiffest setting and 16 the softest. Start from TEIN's recommended setting and change it a few clicks at a time. On this car some adjusters are hard to reach once fitted (see the vehicle-specific notes), so TEIN recommends its EDFC controller.\u003c\/p\u003e\n\u003ch3\u003eDoes it work with TEIN EDFC?\u003c\/h3\u003e\n\u003cp\u003eYes. You'll need TEIN's EDFC5 controller kit plus motor kit EDK05-12120 for this car, both sold separately. EDFC lets you change damping from inside the car.\u003c\/p\u003e\n\u003ch3\u003eAre top mounts included?\u003c\/h3\u003e\n\u003cp\u003eYes. Vehicle-specific top mounts are included in the kit.\u003c\/p\u003e\n\u003ch3\u003eDo I need a wheel alignment after fitting?\u003c\/h3\u003e\n\u003cp\u003eYes. Changing ride height alters camber and toe, so have a full four-wheel alignment done once the springs have settled and the height is final.\u003c\/p\u003e\n\u003ch3\u003eAre TEIN coilovers road legal in the UK?\u003c\/h3\u003e\n\u003cp\u003eCoilovers can be used on UK roads as long as the car stays roadworthy: keep a sensible ride height, enough clearance and correctly aimed headlights. Modifying your suspension should be declared to your insurer.\u003c\/p\u003e\n\u003ch3\u003eWhat does the second adjuster on FS2 do?\u003c\/h3\u003e\n\u003cp\u003eFS2 has one 16-level adjuster that changes compression and rebound together, plus a second 16-level adjuster for compression only. That lets you soften how the car reacts to sharp bumps without changing the overall control.\u003c\/p\u003e\n\u003ch3\u003eWhat warranty do TEIN coilovers come with?\u003c\/h3\u003e\n\u003cp\u003eTEIN UK covers its suspension for 12 months from the date of purchase against defects in materials and workmanship. Keep your invoice, as it's needed for any claim.\u003c\/p\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":58920521040255,"sku":"VSGP4-N1AA3-2","price":2019.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6251\/6693\/files\/teinFS2-1_0e028e67-39d5-41c3-9768-3b968a692800.jpg?v=1792772610","url":"https:\/\/coilovers.co.uk\/products\/tein-fs2-coilovers-tesla-model-3-long-range-17","provider":"Coilovers.co.uk","version":"1.0","type":"link"}