{"product_id":"st-xta-coilovers-ford-focus-mk3-12-20","title":"ST XTA Coilovers Ford Focus MK3 12-20","description":"\u003ch2\u003eST XTA Coilovers for Ford Focus MK3 (2012-2020) – 20-55 mm Lower, Height \u0026amp; Rebound Adjustable, Camber Top Mounts\u003c\/h2\u003e\n\u003cp\u003eThis ST XTA kit replaces the standard springs and dampers on the Ford Focus MK3 (2012-2020) with a height-adjustable coilover set. It lowers the car by approx. 25-50 mm at the front and 20-55 mm at the rear, which sharpens the steering, cuts body roll and closes up the wheel arch gap. The ride height is set on threaded struts, so you can go for a subtle drop or use the full approved range, and change it again later.\u003c\/p\u003e\n\u003cp\u003eThe ST XTA is ST's fast road and track day coilover. As well as stepless height adjustment and 16-click rebound damping, most versions come with Unibal (spherical bearing) top mounts on the front axle, so you can adjust front camber after the coilovers are fitted to get more of the tyre on the road in corners and sharper turn-in. It uses a race spring system: a linear main spring for consistent, predictable behaviour, supported where needed by a helper spring that keeps the main spring seated at full droop. ST is part of the KW automotive group, and the kit is developed and made in Germany using KW engineering.\u003c\/p\u003e\n\u003cp\u003eST makes 3 versions of the XTA kit for the Ford Focus MK3, split by body style. Between them they cover the 2.0 ST, 2.0 TDCI ST, 2.3 RS AWD. Use the table in the Fitment section to find the right one, then choose it from the drop-down.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront lowering:\u003c\/strong\u003e approx. 25-50 mm (varies by version)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear lowering:\u003c\/strong\u003e approx. 20-55 mm (varies by version)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight adjustment:\u003c\/strong\u003e Stepless, on threaded strut housings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum ride height (wheel hub centre to arch edge):\u003c\/strong\u003e front 325 mm, rear 325-330 mm (varies by version)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping:\u003c\/strong\u003e Adjustable rebound, 16 clicks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSprings:\u003c\/strong\u003e Linear main springs with helper springs where needed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTop mounts:\u003c\/strong\u003e Front Unibal mounts with camber adjustment (most versions)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrut housings:\u003c\/strong\u003e Galvanised steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproval:\u003c\/strong\u003e Parts certificate (German §19.3)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLowering figures are ST's, measured against the standard car. The actual drop varies with engine, equipment and tolerances on each car, and the springs settle slightly after the first few hundred miles.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront Unibal top mounts with camber adjustment after fitting (most versions, see the kit contents)\u003c\/li\u003e\n\u003cli\u003e16-click adjustable rebound damping, delivered with a base setting for this vehicle\u003c\/li\u003e\n\u003cli\u003eStepless ride height adjustment on a coarse, dirt-resistant trapezoidal thread\u003c\/li\u003e\n\u003cli\u003eRace spring system with linear main springs for consistent, predictable handling\u003c\/li\u003e\n\u003cli\u003eGalvanised, multi-sealed steel strut housings for long-term corrosion protection\u003c\/li\u003e\n\u003cli\u003eComposite spring perches with stainless steel inserts that stay easy to adjust for years\u003c\/li\u003e\n\u003cli\u003eDust covers and bump stops protect the damper seals\u003c\/li\u003e\n\u003cli\u003eDeveloped and built in Germany, based on KW engineering\u003c\/li\u003e\n\u003cli\u003eSupplied with a parts certificate and fitting instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2 x height-adjustable front coilover struts with springs\u003c\/li\u003e\n\u003cli\u003e2 x rear dampers\u003c\/li\u003e\n\u003cli\u003e2 x rear springs with height-adjustable spring seats\u003c\/li\u003e\n\u003cli\u003eFurther parts depend on the version: see the Top Mounts and Rear Setup rows in the specification table for each version\u003c\/li\u003e\n\u003cli\u003eComposite spring perches with stainless steel inserts\u003c\/li\u003e\n\u003cli\u003eDust covers and bump stops\u003c\/li\u003e\n\u003cli\u003eParts certificate and fitting instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e the photos are ST's own images of the kits for this car. Choose your version to see its kit. Small details such as brackets can differ from the photos.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFord Focus III DYB (Jul 2010 to Feb 2020)\u003c\/li\u003e\n\u003cli\u003eFord Focus III Turnier DYB (Jul 2010 to Feb 2020)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhich version do I need?\u003c\/strong\u003e Find your engine, then match the body style, drivetrain and front axle load. The axle load is on your VIN plate (door pillar or under the bonnet, the line marked \"1-\"). Not sure? Send us your registration and we will check.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eVersion\u003c\/th\u003e\n\u003cth\u003eEngines\u003c\/th\u003e\n\u003cth\u003eMax axle load F \/ R\u003c\/th\u003e\n\u003cth\u003eLowering F \/ R\u003c\/th\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eST Saloon\u003c\/td\u003e\n\u003ctd\u003e2.0 ST 184-188kW, 2.0 TDCI ST 136kW\u003c\/td\u003e\n\u003ctd\u003e1070 kg \/ 1040 kg\u003c\/td\u003e\n\u003ctd\u003e25-40 mm \/ 20-35 mm\u003c\/td\u003e\n\u003ctd\u003e18230859\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eST Estate\u003c\/td\u003e\n\u003ctd\u003e2.0 ST 184kW, 2.0 TDCI ST 136kW\u003c\/td\u003e\n\u003ctd\u003e1070 kg \/ 1035 kg\u003c\/td\u003e\n\u003ctd\u003e25-40 mm \/ 20-40 mm\u003c\/td\u003e\n\u003ctd\u003e18230860\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRS\u003c\/td\u003e\n\u003ctd\u003e2.3 RS AWD 257kW\u003c\/td\u003e\n\u003ctd\u003e1070 kg \/ 1040 kg\u003c\/td\u003e\n\u003ctd\u003e30-50 mm \/ 35-55 mm\u003c\/td\u003e\n\u003ctd\u003e18230867\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e Other generations or body styles, which need their own kit, such as \u003ca href=\"\/products\/st-xta-coilovers-ford-focus-mk2-04-13\"\u003eST XTA Coilovers Ford Focus MK2 04-13\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdaptive dampers:\u003c\/strong\u003e if your car has electronically controlled dampers, the system must be switched off with a cancellation kit (sold separately) to stop warning lights and fault codes: electronic damping: KW cancellation kit (part no. 68510462).\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eFitting means removing the original struts, springs and dampers and fitting the ST units in their place. We recommend a qualified workshop experienced with coilovers. Some versions include new front top mounts (see the kit contents). Otherwise a spring compressor is needed to strip the original front struts, and the original top mounts, bearings and fixings are reused, so check them for wear. Set the ride height within the approved range, tighten the suspension bolts with the car's weight on its wheels, and torque everything to the manufacturer's figures. A four-wheel alignment is required once the car is at its final ride height. Re-check the height and alignment after the first few hundred miles, once the springs have settled.\u003c\/p\u003e\n\u003cp\u003eThe fitting instructions and parts certificate for each version can be downloaded from its specification table once you choose your version.\u003c\/p\u003e\n\u003cp\u003eSet the front camber on the Unibal top mounts before the alignment, and start with the rebound adjusters on ST's base setting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBefore you start:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDisconnect any ride height sensors (headlight levelling or self-levelling) before removing the old struts.\u003c\/li\u003e\n\u003cli\u003eClean the threads before adjusting, and start with the height adjusters in the middle of their range.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAfter fitting:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDo not go below ST's minimum height, measured from the wheel hub centre to the wheel arch edge: front 325 mm, rear 325-330 mm (see the spec table for your version).\u003c\/li\u003e\n\u003cli\u003eExpect the car to settle a further 5-10 mm once it has been driven, then re-check the height.\u003c\/li\u003e\n\u003cli\u003eCheck there is at least 5 mm clearance between the tyres and the suspension through the full steering and suspension travel.\u003c\/li\u003e\n\u003cli\u003eHave the headlight aim reset, along with any other height-dependent systems.\u003c\/li\u003e\n\u003cli\u003eESP\/ABS warning lights can appear after fitting. Some clear after a short drive, others need full steering lock both ways or a reset with a diagnostic tool.\u003c\/li\u003e\n\u003cli\u003eOn cars with radar or camera driver assistance systems, have the calibration checked after lowering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhich version do I need for my Ford Focus MK3?\u003c\/h3\u003e\n\u003cp\u003eStart with your engine in the Fitment table, then match the body style, drivetrain and front axle load (on your VIN plate). If more than one row fits, or your car isn't listed, send us your registration and we will confirm the right part number.\u003c\/p\u003e\n\u003ch3\u003eWill this fit my Ford Focus MK3?\u003c\/h3\u003e\n\u003cp\u003eIt fits the Ford Focus MK3 (2012-2020) with the 2.0 ST, 2.0 TDCI ST, 2.3 RS AWD. Check the Fitment section for the body styles and exclusions, or send us your registration and we will check.\u003c\/p\u003e\n\u003ch3\u003eHow low will my Ford Focus MK3 sit?\u003c\/h3\u003e\n\u003cp\u003eST quotes a drop of approx. 25-50 mm at the front and 20-55 mm at the rear compared with standard, depending on the version. The exact drop varies from car to car with engine, equipment and tolerances. ST also sets a minimum: the distance from the wheel hub centre to the wheel arch edge must stay above approx. 325 mm at the front and 325-330 mm at the rear.\u003c\/p\u003e\n\u003ch3\u003eCan I adjust the damping?\u003c\/h3\u003e\n\u003cp\u003eYes. The rebound adjuster has 16 clicks and the kit arrives on ST's base setting for this car. Turn towards firm for tighter body control or towards soft for a more comfortable ride.\u003c\/p\u003e\n\u003ch3\u003eWill the ST XTA make my Ford Focus MK3 ride harshly?\u003c\/h3\u003e\n\u003cp\u003eThe XTA is the sportiest ST kit, with linear race springs, so it is noticeably firmer than standard. The 16-click rebound adjuster lets you take some of the edge off for road use, but it is aimed at fast road and track day cars.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment after fitting?\u003c\/h3\u003e\n\u003cp\u003eYes. Changing the ride height changes camber and toe, so a full four-wheel alignment is needed once the car is at its final height, and again after any later change. With the XTA you can also set front camber on the top mounts.\u003c\/p\u003e\n\u003ch3\u003eMy car has adaptive dampers. Will this kit fit?\u003c\/h3\u003e\n\u003cp\u003eOnly with the correct KW cancellation kit, which switches off the electronic damper control so no warning lights appear. The kit number is in the Fitment section. Some versions are not suitable for adaptive dampers at all, so contact us if you are unsure.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal in the UK?\u003c\/h3\u003e\n\u003cp\u003eYes. It is designed for road use and comes with a German parts certificate. Keep the ride height within ST's approved range and tell your insurer about the modification.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, ST covers it against defects in materials and workmanship. If a part ever needs replacing, contact us with your vehicle details and order number.\u003c\/p\u003e","brand":"ST Suspensions","offers":[{"title":"ST Saloon, Front Axle up to 1070kg","offer_id":58920307556735,"sku":"ST-18230859","price":1210.3,"currency_code":"GBP","in_stock":true},{"title":"ST Estate, Front Axle up to 1070kg","offer_id":58920307589503,"sku":"ST-18230860","price":1210.3,"currency_code":"GBP","in_stock":true},{"title":"RS, Front Axle up to 1070kg","offer_id":58920307622271,"sku":"ST-18230867","price":1210.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6251\/6693\/files\/ST-18230859_001-1000.jpg?v=1792771599","url":"https:\/\/coilovers.co.uk\/products\/st-xta-coilovers-ford-focus-mk3-12-20","provider":"Coilovers.co.uk","version":"1.0","type":"link"}