{"product_id":"st-x-coilovers-ford-focus-mk2-04-13","title":"ST X Coilovers Ford Focus MK2 04-13","description":"\u003ch2\u003eST X Coilovers for Ford Focus MK2 (2004-2013) – 10-70 mm Lower, Height Adjustable, Fixed Damping\u003c\/h2\u003e\n\u003cp\u003eThis ST X kit replaces the standard springs and dampers on the Ford Focus MK2 (2004-2013) with a height-adjustable coilover set. It lowers the car by approx. 10-60 mm at the front and 15-70 mm at the rear, which sharpens the steering, cuts body roll and closes up the wheel arch gap. The ride height is set on threaded struts, so you can go for a subtle drop or use the full approved range, and change it again later.\u003c\/p\u003e\n\u003cp\u003eThe ST X is the entry point to the ST range. It is built around a damper setting that ST have matched to this specific car, so there is nothing to adjust beyond ride height. Shaped (progressive) springs keep the ride compliant over small bumps and firm up as the suspension compresses, which makes it a good fit for a daily driver that needs to look lower and feel tighter without becoming harsh. ST is part of the KW automotive group, and the kit is developed and made in Germany using KW engineering.\u003c\/p\u003e\n\u003cp\u003eST makes 5 versions of the X kit for the Ford Focus MK2, split by body style and front axle weight. Between them they cover the 1.4, 1.6, 1.6 TDCI, 1.6 Ti, 1.8, 1.8 TDCI, 2.0, 2.0 TDCI and more. Use the table in the Fitment section to find the right one, then choose it from the drop-down.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront lowering:\u003c\/strong\u003e approx. 10-60 mm (varies by version)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear lowering:\u003c\/strong\u003e approx. 15-70 mm (varies by version)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight adjustment:\u003c\/strong\u003e Stepless, on threaded strut housings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum ride height (wheel hub centre to arch edge):\u003c\/strong\u003e front 320-325 mm, rear 320-355 mm (varies by version)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping:\u003c\/strong\u003e Fixed, pre-set by ST for this vehicle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSprings:\u003c\/strong\u003e Shaped progressive springs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrut housings:\u003c\/strong\u003e Galvanised steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproval:\u003c\/strong\u003e Parts certificate (German §19.3)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLowering figures are ST's, measured against the standard car. The actual drop varies with engine, equipment and tolerances on each car, and the springs settle slightly after the first few hundred miles.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStepless ride height adjustment on a coarse, dirt-resistant trapezoidal thread\u003c\/li\u003e\n\u003cli\u003eDamper setting developed by ST for this vehicle, so no setup is needed beyond ride height\u003c\/li\u003e\n\u003cli\u003eShaped progressive springs for a comfortable ride with firmer support in corners\u003c\/li\u003e\n\u003cli\u003eGalvanised, multi-sealed steel strut housings for long-term corrosion protection\u003c\/li\u003e\n\u003cli\u003eComposite spring perches with stainless steel inserts that stay easy to adjust for years\u003c\/li\u003e\n\u003cli\u003eDust covers and bump stops protect the damper seals and act as an extra spring under heavy load\u003c\/li\u003e\n\u003cli\u003eDeveloped and built in Germany, based on KW engineering\u003c\/li\u003e\n\u003cli\u003eSupplied with a parts certificate and fitting instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2 x height-adjustable front coilover struts with springs\u003c\/li\u003e\n\u003cli\u003e2 x rear dampers\u003c\/li\u003e\n\u003cli\u003e2 x rear springs with height-adjustable spring seats\u003c\/li\u003e\n\u003cli\u003eComposite spring perches with stainless steel inserts\u003c\/li\u003e\n\u003cli\u003eDust covers and bump stops\u003c\/li\u003e\n\u003cli\u003eParts certificate and fitting instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e the photos are ST's own images of the kits for this car. Choose your version to see its kit. Small details such as brackets can differ from the photos.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFord Focus II DA (Jul 2004 to Sep 2013)\u003c\/li\u003e\n\u003cli\u003eFord Focus II Convertible DB3 (Oct 2006 to Sep 2010)\u003c\/li\u003e\n\u003cli\u003eFord Focus II Saloon DB, FCH, DH (Apr 2005 to Sep 2013)\u003c\/li\u003e\n\u003cli\u003eFord Focus II Station Wagon DA, FFS, DS (Jul 2004 to Sep 2012)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhich version do I need?\u003c\/strong\u003e Find your engine, then match the body style, drivetrain and front axle load. The axle load is on your VIN plate (door pillar or under the bonnet, the line marked \"1-\"). Not sure? Send us your registration and we will check.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eVersion\u003c\/th\u003e\n\u003cth\u003eEngines\u003c\/th\u003e\n\u003cth\u003eMax axle load F \/ R\u003c\/th\u003e\n\u003cth\u003eLowering F \/ R\u003c\/th\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSaloon\u003c\/td\u003e\n\u003ctd\u003e1.4 59kW, 1.6 74-81kW, 1.6 TDCI 66-80kW, 1.6 Ti 85kW, 1.8 92kW, 1.8 TDCI 85kW, 2.0 104-107kW, 2.0 TDCI 81-100kW\u003c\/td\u003e\n\u003ctd\u003e1070 kg \/ 1015 kg\u003c\/td\u003e\n\u003ctd\u003e30-60 mm \/ 35-65 mm\u003c\/td\u003e\n\u003ctd\u003e13230021\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eST\u003c\/td\u003e\n\u003ctd\u003e2.5 ST 166kW\u003c\/td\u003e\n\u003ctd\u003e1050 kg \/ 990 kg\u003c\/td\u003e\n\u003ctd\u003e10-40 mm \/ 15-45 mm\u003c\/td\u003e\n\u003ctd\u003e13230023\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEstate\u003c\/td\u003e\n\u003ctd\u003e1.4 59kW, 1.6 74kW, 1.6 TDCI 66-81kW, 1.6 Ti 85kW, 1.8 92kW, 1.8 TDCI 85kW, 2.0 107kW, 2.0 TDCI 81-100kW\u003c\/td\u003e\n\u003ctd\u003e1070 kg \/ 1090 kg\u003c\/td\u003e\n\u003ctd\u003e30-60 mm \/ 40-70 mm\u003c\/td\u003e\n\u003ctd\u003e13230022\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConvertible\u003c\/td\u003e\n\u003ctd\u003e1.6 74kW, 2.0 107kW, 2.0 TDCI 100kW\u003c\/td\u003e\n\u003ctd\u003e1070 kg \/ 1065 kg\u003c\/td\u003e\n\u003ctd\u003e20-50 mm \/ 20-50 mm\u003c\/td\u003e\n\u003ctd\u003e13230039\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRS\u003c\/td\u003e\n\u003ctd\u003e2.5 RS 224kW, 2.5 RS 500 257kW\u003c\/td\u003e\n\u003ctd\u003e1040 kg \/ 920 kg\u003c\/td\u003e\n\u003ctd\u003e25-50 mm \/ 20-45 mm\u003c\/td\u003e\n\u003ctd\u003e13230054\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e Other generations or body styles, which need their own kit, such as \u003ca href=\"\/products\/st-x-coilovers-ford-focus-c-max-03-07\"\u003eST X Coilovers Ford Focus C-Max 03-07\u003c\/a\u003e, \u003ca href=\"\/products\/st-x-coilovers-ford-focus-rs-mk1-02-09\"\u003eST X Coilovers Ford Focus RS MK1 02-09\u003c\/a\u003e, \u003ca href=\"\/products\/st-x-coilovers-ford-focus-mk1-estate-99-07\"\u003eST X Coilovers Ford Focus MK1 Estate 99-07\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eFitting means removing the original struts, springs and dampers and fitting the ST units in their place. We recommend a qualified workshop experienced with coilovers. A spring compressor is needed to strip down the original front struts. The original top mounts, bearings and fixings are reused, so check them for wear and replace any that are worn. Set the ride height within the approved range, tighten the suspension bolts with the car's weight on its wheels, and torque everything to the manufacturer's figures. A four-wheel alignment is required once the car is at its final ride height. Re-check the height and alignment after the first few hundred miles, once the springs have settled.\u003c\/p\u003e\n\u003cp\u003eThe fitting instructions and parts certificate for each version can be downloaded from its specification table once you choose your version.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBefore you start:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWith the factory wheels and tyres, wheel spacers may be needed to give enough clearance to the coilovers.\u003c\/li\u003e\n\u003cli\u003eOn the original wheel sizes, wheel spacers may be needed to keep enough clearance.\u003c\/li\u003e\n\u003cli\u003eDisconnect any ride height sensors (headlight levelling or self-levelling) before removing the old struts.\u003c\/li\u003e\n\u003cli\u003eClean the threads before adjusting, and start with the height adjusters in the middle of their range.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAfter fitting:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDo not go below ST's minimum height, measured from the wheel hub centre to the wheel arch edge: front 320-325 mm, rear 320-355 mm (see the spec table for your version).\u003c\/li\u003e\n\u003cli\u003eExpect the car to settle a further 5-10 mm once it has been driven, then re-check the height.\u003c\/li\u003e\n\u003cli\u003eCheck there is at least 5 mm clearance between the tyres and the suspension through the full steering and suspension travel.\u003c\/li\u003e\n\u003cli\u003eHave the headlight aim reset, along with any other height-dependent systems.\u003c\/li\u003e\n\u003cli\u003eESP\/ABS warning lights can appear after fitting. Some clear after a short drive, others need full steering lock both ways or a reset with a diagnostic tool.\u003c\/li\u003e\n\u003cli\u003eOn cars with radar or camera driver assistance systems, have the calibration checked after lowering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cp\u003eWant to fine-tune the ride? The \u003ca href=\"\/products\/st-xa-coilovers-ford-focus-mk2-04-13\"\u003eST XA Coilovers Ford Focus MK2 04-13\u003c\/a\u003e adds 16-click rebound adjustment.\u003c\/p\u003e\n\u003cp\u003eFor track days, the \u003ca href=\"\/products\/st-xta-coilovers-ford-focus-mk2-04-13\"\u003eST XTA Coilovers Ford Focus MK2 04-13\u003c\/a\u003e adds camber-adjustable top mounts and a race spring system.\u003c\/p\u003e\n\u003ch3\u003eWhich version do I need for my Ford Focus MK2?\u003c\/h3\u003e\n\u003cp\u003eStart with your engine in the Fitment table, then match the body style, drivetrain and front axle load (on your VIN plate). If more than one row fits, or your car isn't listed, send us your registration and we will confirm the right part number.\u003c\/p\u003e\n\u003ch3\u003eWill this fit my Ford Focus MK2?\u003c\/h3\u003e\n\u003cp\u003eIt fits the Ford Focus MK2 (2004-2013) with the 1.4, 1.6, 1.6 TDCI, 1.6 Ti, 1.8, 1.8 TDCI and more. Check the Fitment section for the body styles and exclusions, or send us your registration and we will check.\u003c\/p\u003e\n\u003ch3\u003eHow low will my Ford Focus MK2 sit?\u003c\/h3\u003e\n\u003cp\u003eST quotes a drop of approx. 10-60 mm at the front and 15-70 mm at the rear compared with standard, depending on the version. The exact drop varies from car to car with engine, equipment and tolerances. ST also sets a minimum: the distance from the wheel hub centre to the wheel arch edge must stay above approx. 320-325 mm at the front and 320-355 mm at the rear.\u003c\/p\u003e\n\u003ch3\u003eCan I adjust the damping?\u003c\/h3\u003e\n\u003cp\u003eNo, the damping is pre-set by ST to suit the springs, so there is nothing to set up. You only adjust the ride height. If you want adjustable damping, look at the ST XA.\u003c\/p\u003e\n\u003ch3\u003eWill the ST X make my Ford Focus MK2 ride harshly?\u003c\/h3\u003e\n\u003cp\u003eThe ST X uses progressive springs and a fixed damper setting chosen by ST for this car, so it is firmer than standard but still suits everyday driving. Lowering a long way or fitting low-profile tyres will firm up the ride more than the coilovers themselves.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment after fitting?\u003c\/h3\u003e\n\u003cp\u003eYes. Changing the ride height changes camber and toe, so a full four-wheel alignment is needed once the car is at its final height, and again after any later change.\u003c\/p\u003e\n\u003ch3\u003eWill my standard wheels fit?\u003c\/h3\u003e\n\u003cp\u003eOn the original wheel sizes, ST says wheel spacers may be needed to keep enough clearance. Aftermarket wheels should be checked for clearance at your chosen ride height.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal in the UK?\u003c\/h3\u003e\n\u003cp\u003eYes. It is designed for road use and comes with a German parts certificate. Keep the ride height within ST's approved range and tell your insurer about the modification.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, ST covers it against defects in materials and workmanship. If a part ever needs replacing, contact us with your vehicle details and order number.\u003c\/p\u003e","brand":"ST Suspensions","offers":[{"title":"Saloon, Front Axle up to 1070kg","offer_id":58920075133311,"sku":"ST-13230021","price":788.5,"currency_code":"GBP","in_stock":true},{"title":"ST, Front Axle up to 1050kg","offer_id":58920075166079,"sku":"ST-13230023","price":788.5,"currency_code":"GBP","in_stock":true},{"title":"Estate, Front Axle up to 1070kg","offer_id":58920075198847,"sku":"ST-13230022","price":788.5,"currency_code":"GBP","in_stock":true},{"title":"Convertible, Front Axle up to 1070kg","offer_id":58920075231615,"sku":"ST-13230039","price":788.5,"currency_code":"GBP","in_stock":true},{"title":"RS, Front Axle up to 1040kg","offer_id":58920075264383,"sku":"ST-13230054","price":788.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6251\/6693\/files\/ST-13230023_001-1000.jpg?v=1792769977","url":"https:\/\/coilovers.co.uk\/products\/st-x-coilovers-ford-focus-mk2-04-13","provider":"Coilovers.co.uk","version":"1.0","type":"link"}