{"product_id":"nitron-elec-tron-r3-clubsport-coilovers-lotus-emira-v6-22","title":"Nitron elec-TRON R3 ClubSport Coilovers Lotus Emira V6 22+","description":"\u003ch2\u003eNitron elec-TRON R3 Coilovers for Lotus Emira V6 (2022 on) – Semi-Active Coilovers with Manual Compression Adjustment\u003c\/h2\u003e\n\u003cp\u003eNitron elec-TRON R3 coilovers for the Lotus Emira V6 (2022 on), hand built to order for enthusiasts and professionals who want the most from their car on road and track.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e This kit is supplied with the Nitron DCU, wiring harness and switch, so no extra controller is needed.\u003c\/p\u003e\n\u003cp\u003eThe elec-TRON R3 combines the electronic solenoid valve with manual high and low-speed compression adjusters (16 high-speed and 26 low-speed clicks). The manual settings set the baseline, and the electronic valve then adjusts damping in real time. Piggyback or remote reservoirs keep compression changes quick and simple.\u003c\/p\u003e\n\u003cp\u003eNitron's elec-TRON proportional solenoid valve gives each damper its own electronically controlled valve, so damping can be adjusted individually at every wheel. The valve works across a 300-1800mA range and moves from full hard to full soft in around 6 to 8 milliseconds, adjusting both compression and rebound by fine-tuning the bleed of the shim stack inside Nitron's gas-pressurised monotube damper.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping:\u003c\/strong\u003e Electronic valve plus manual compression (16 high-speed, 26 low-speed clicks)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReservoir:\u003c\/strong\u003e Piggyback\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting brackets:\u003c\/strong\u003e Not Required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring Spec:\u003c\/strong\u003e front 550 lbs\/in (96 N\/mm), rear 700 lbs\/in (123 N\/mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNitron proportional solenoid valve on every damper\u003c\/li\u003e\n\u003cli\u003e16 high-speed and 26 low-speed compression clicks to set the baseline\u003c\/li\u003e\n\u003cli\u003ePiggyback or remote reservoirs\u003c\/li\u003e\n\u003cli\u003eAdjustable top mounts and race springs\u003c\/li\u003e\n\u003cli\u003e300-1800mA operating range with a 6 to 8 millisecond response\u003c\/li\u003e\n\u003cli\u003eGas-pressurised monotube construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2 x front coilovers with springs\u003c\/li\u003e\n\u003cli\u003e2 x rear dampers with springs\u003c\/li\u003e\n\u003cli\u003eNitron adjustable top mounts\u003c\/li\u003e\n\u003cli\u003eNitron DCU with wiring harness and switch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e images are for illustration only. Specific details, finishes and end fittings may differ from those shown.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLotus Emira V6 (2022 on)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models or sub-models not listed above. Please check your model and sub model before ordering.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe kit replaces the standard dampers and springs. Set the ride height and preload, let the suspension settle, then recheck the height and have a four-wheel alignment carried out. We recommend professional fitting.\u003c\/p\u003e\n\u003cp\u003eAll Nitron shocks are hand made to order. Lead times are normally 2-3 weeks, but can be longer at busy times, so contact us for an up-to-date estimate.\u003c\/p\u003e\n\u003ch3\u003eHow is the damping adjusted?\u003c\/h3\u003e\n\u003cp\u003eThe elec-TRON valve controls damping electronically, and manual high and low-speed compression adjusters (16 and 26 clicks) set the baseline.\u003c\/p\u003e\n\u003ch3\u003eDo I need anything else to run this kit?\u003c\/h3\u003e\n\u003cp\u003eThis kit is supplied with the Nitron DCU, wiring harness and switch, so no extra controller is needed.\u003c\/p\u003e\n\u003ch3\u003eCan I have different spring rates?\u003c\/h3\u003e\n\u003cp\u003eYes. Every kit is built and sprung to order, so contact us before ordering to discuss your spring rates.\u003c\/p\u003e\n\u003ch3\u003eCan the dampers be serviced?\u003c\/h3\u003e\n\u003cp\u003eYes. Nitron dampers are fully serviceable, so they can be rebuilt and refreshed rather than replaced.\u003c\/p\u003e\n\u003ch3\u003eDo I need a wheel alignment after fitting?\u003c\/h3\u003e\n\u003cp\u003eYes. Changing the suspension and ride height alters the geometry, so a four-wheel alignment should be carried out once the car has settled.\u003c\/p\u003e\n\u003ch3\u003eHow long will it take to arrive?\u003c\/h3\u003e\n\u003cp\u003eAll Nitron shocks are hand made to order. Lead times are normally 2-3 weeks, but contact us for an up-to-date estimate.\u003c\/p\u003e\n\u003ch3\u003eWhat warranty is included?\u003c\/h3\u003e\n\u003cp\u003eNitron products are covered against defects in materials and workmanship. Contact us if you have a problem with your kit.\u003c\/p\u003e","brand":"Nitron","offers":[{"title":"Default Title","offer_id":58919798145407,"sku":"NTCLO031ER3_CS","price":7998.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6251\/6693\/files\/NitronClubSport-1.jpg?v=1792767883","url":"https:\/\/coilovers.co.uk\/products\/nitron-elec-tron-r3-clubsport-coilovers-lotus-emira-v6-22","provider":"Coilovers.co.uk","version":"1.0","type":"link"}