{"product_id":"eibach-pro-street-s-coilovers-seat-leon-1m1-cupra-2-8-01-06","title":"Eibach Pro-Street-S Coilovers Seat Leon 1M1 Cupra 2.8 01-06","description":"\u003ch2\u003eEibach Pro-Street-S Coilovers for Seat Leon 1M1 Cupra 2.8 (2001-2006) – 30-55 mm Lower, TÜV Approved\u003c\/h2\u003e\u003cp\u003eThis Eibach Pro-Street-S kit replaces the standard springs and dampers on the Seat Leon 1M1 (2001-2006) with a height-adjustable coilover set. It lowers the car by approx. 30-55 mm, which sharpens the steering, cuts body roll and closes up the wheel arch gap. The front ride height is set on threaded coilover struts, and the rear has its own height-adjustable spring seat, so each end can be set independently.\u003c\/p\u003e\u003cp\u003eThe Pro-Street-S uses stainless steel dampers with the damping pre-set by Eibach to suit the springs, which are developed from Eibach's ERS motorsport spring range. The spring seats are made from a polyamide composite, so they will not seize to the threads and the ride height can still be adjusted years later. The result is a firm, controlled car that is still comfortable enough to use every day.\u003c\/p\u003e\u003cp\u003eEibach makes more than one kit for the Seat Leon 1M1. This one is for 2.8 Cupra 4 with 1030kg front and 1020kg rear max axle load. Check the Fitment section below before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront lowering:\u003c\/strong\u003e approx. 30-55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear lowering:\u003c\/strong\u003e approx. 30-55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax front axle load:\u003c\/strong\u003e 1030 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax rear axle load:\u003c\/strong\u003e 1020 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight adjustment:\u003c\/strong\u003e Threaded struts at the front, separate height adjuster at the rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping:\u003c\/strong\u003e Pre-set by Eibach to match the springs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertificate:\u003c\/strong\u003e TÜV components certificate\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eLowering figures are Eibach's, measured against the standard car. The actual drop varies with engine, gearbox, equipment and tolerances on each car.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable front and rear, set independently\u003c\/li\u003e\n\u003cli\u003eDamping pre-set by Eibach to match the springs - nothing to set up\u003c\/li\u003e\n\u003cli\u003eStainless steel dampers and polyamide composite spring seats that resist corrosion\u003c\/li\u003e\n\u003cli\u003eSprings developed from Eibach's ERS motorsport range\u003c\/li\u003e\n\u003cli\u003eLowers the car by approx. 30-55 mm\u003c\/li\u003e\n\u003cli\u003eSharper steering response and less body roll than the standard suspension\u003c\/li\u003e\n\u003cli\u003eTÜV components certificate\u003c\/li\u003e\n\u003cli\u003eDeveloped and made by Eibach in Germany\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2 x front coilover struts\u003c\/li\u003e\n\u003cli\u003e2 x rear dampers with Eibach springs and height-adjustable spring seats\u003c\/li\u003e\n\u003cli\u003eAdjustment spanners\u003c\/li\u003e\n\u003cli\u003eTÜV components certificate\u003c\/li\u003e\n\u003cli\u003eFitting instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e the photos are for reference only and show a typical Eibach Pro-Street-S kit. The exact struts, dampers and springs supplied depend on your car.\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSeat Leon 1M1 (2001-2006)\u003c\/li\u003e\n\u003cli\u003eEngines: 2.8 Cupra 4\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWhich kit do I need?\u003c\/strong\u003e Eibach makes these versions of the Pro-Street-S for the Seat Leon 1M1. Pick the row that matches your car:\u003c\/p\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003cth\u003eEngines\u003c\/th\u003e\n\u003cth\u003eLowering\u003c\/th\u003e\n\u003cth\u003eMax axle load F \/ R\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/eibach-pro-street-s-coilovers-seat-leon-1m1-99-06-type-a\"\u003ePSS65-85-001-01-22\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e1.4 16V, 1.6, 1.6 16V, 1.8 20V, 1.8 20V T, 1.8 T Cupra R, 1.9 SDI, 1.9 TDI\u003c\/td\u003e\n\u003ctd\u003e35-65 mm\u003c\/td\u003e\n\u003ctd\u003e1030kg \/ 1025kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/eibach-pro-street-s-coilovers-seat-leon-1m1-99-06-type-b\"\u003ePSS65-85-001-02-22\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e1.8 20V T 4, 1.9 TDI Syncro\u003c\/td\u003e\n\u003ctd\u003e30-55 mm\u003c\/td\u003e\n\u003ctd\u003e1030kg \/ 1020kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eThis kit\u003c\/strong\u003e - PSS65-85-001-05-22\u003c\/td\u003e\n\u003ctd\u003e2.8 Cupra 4\u003c\/td\u003e\n\u003ctd\u003e30-55 mm\u003c\/td\u003e\n\u003ctd\u003e1030kg \/ 1020kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e other versions of the Seat Leon. The Seat Leon 1M1 inc Cupra R 99-06 needs the \u003ca href=\"\/products\/eibach-pro-street-s-coilovers-seat-leon-1m1-99-06-type-a\"\u003eEibach Pro-Street-S Coilovers Seat Leon 1M1 inc Cupra R 99-06\u003c\/a\u003e. The Seat Leon 1M1 99-06 needs the \u003ca href=\"\/products\/eibach-pro-street-s-coilovers-seat-leon-1m1-99-06-type-b\"\u003eEibach Pro-Street-S Coilovers Seat Leon 1M1 99-06\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eFitting means removing the original struts, springs and dampers and fitting the Eibach units in their place. We recommend a qualified workshop. A spring compressor is needed to strip down the original front struts. Set the ride height with the wheels off the ground, never use an impact gun on the damper piston rod nut, and torque everything to the manufacturer's figures. A four-wheel alignment is required once the car is at its final ride height. Re-check the height and alignment after the first few hundred miles, once the springs have settled.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you start:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSome fitments need extra original manufacturer parts to complete the installation. Check the fitting instructions for your car before booking the work in.\u003c\/li\u003e\n\u003cli\u003eOn the original wheel sizes, wheel spacers may be needed to keep enough clearance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWill this fit my Seat Leon 1M1?\u003c\/h3\u003e\u003cp\u003eIt fits the Seat Leon 1M1 (2001-2006) with 2.8 Cupra 4. Check the Fitment section for the exclusions, or use our number plate lookup.\u003c\/p\u003e\u003ch3\u003eHow low will it sit?\u003c\/h3\u003e\u003cp\u003eEibach quotes approx. 30-55 mm lower than standard. The exact drop varies from car to car with engine, equipment and tolerances.\u003c\/p\u003e\u003ch3\u003eCan I adjust the damping?\u003c\/h3\u003e\u003cp\u003eNo, the damping is pre-set by Eibach to suit the springs, so there is nothing to set up. You only adjust the ride height. If you want adjustable damping, look at the Eibach Pro-Street-Multi.\u003c\/p\u003e\u003ch3\u003eDo I need an alignment after fitting?\u003c\/h3\u003e\u003cp\u003eYes. Eibach requires a full four-wheel alignment once the car is set at its final ride height, and another check after the springs have settled.\u003c\/p\u003e\u003ch3\u003eIs it road legal in the UK?\u003c\/h3\u003e\u003cp\u003eYes. It comes with a TÜV components certificate. Keep the ride height within Eibach's quoted range and tell your insurer about the modification.\u003c\/p\u003e\u003ch3\u003eWill my standard wheels fit?\u003c\/h3\u003e\u003cp\u003eOn the original wheel sizes, Eibach says wheel spacers may be needed to keep enough clearance. Aftermarket wheels should be checked for clearance at your chosen ride height.\u003c\/p\u003e\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\u003cp\u003eYes, Eibach covers it against defects in materials and workmanship. If a part ever needs replacing, contact us with your vehicle details and order number.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":58919270547839,"sku":"PSS65-85-001-05-22","price":1140.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6251\/6693\/files\/eibach-pro-street-s-coilovers-seat-leon-1m1-01-06-823.webp?v=1792764535","url":"https:\/\/coilovers.co.uk\/products\/eibach-pro-street-s-coilovers-seat-leon-1m1-cupra-2-8-01-06","provider":"Coilovers.co.uk","version":"1.0","type":"link"}