{"product_id":"bilstein-evo-t2-coilovers-bmw-m3-g80-g82-rwd-20","title":"Bilstein Evo T2 Coilovers BMW M3 G80 G82 RWD 20+","description":"\u003ch2\u003eBilstein EVO T2 Coilovers for BMW M3 G80 G82 RWD (2020 onwards) – Height Adjustable with 100 Damping Settings\u003c\/h2\u003e\n\u003cp\u003eBilstein EVO T2 coilovers give the BMW M3 G80 G82 RWD a fully adjustable, track-capable suspension. Ride height is set steplessly on threaded bodies, up to approx. 70mm lower depending on the car, and each damper has separate rebound and bump adjustment.\u003c\/p\u003e\n\u003cp\u003eTwo aluminium dials give 100 damping combinations and can be turned by hand without tools. Compression is controlled at both the piston and a separate bottom valve for finer control, and the bodies have a zinc-nickel coating to resist corrosion.\u003c\/p\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRide height:\u003c\/strong\u003e Lowering approx. -25 to -40 mm front \/ -20 to -45 mm rear (saloon)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping:\u003c\/strong\u003e Two-way adjustable: 10 clicks rebound x 10 clicks bump (100 settings)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamper design:\u003c\/strong\u003e Mix of twin-tube and monotube gas-pressure (varies by axle)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRide-height figures are Bilstein's application data for this part number, measured against the car's standard ride height. The actual change depends on the car's engine, equipment and the condition of the parts being replaced.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSeparate rebound and bump adjustment, 100 combinations\u003c\/li\u003e\n\u003cli\u003eHand-adjustable aluminium dials, no tools needed\u003c\/li\u003e\n\u003cli\u003eStepless height adjustment, up to approx. 70mm lower\u003c\/li\u003e\n\u003cli\u003eZinc-nickel coating for corrosion protection\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested by Bilstein for this specific car\u003c\/li\u003e\n\u003cli\u003eSupplied with a parts certificate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2 x front Bilstein EVO T2 height-adjustable coilover units with two-way adjusters\u003c\/li\u003e\n\u003cli\u003e2 x rear Bilstein EVO T2 adjustable dampers with springs (layout follows the car's original rear suspension)\u003c\/li\u003e\n\u003cli\u003eParts certificate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e the photo shows a typical Bilstein EVO T2 kit. The parts for your car are specific to it and will differ in appearance. Top mounts and fitting hardware are not included unless listed above.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW M3 G80 G82 RWD (2020 onwards)\u003c\/li\u003e\n\u003cli\u003eEngines: M3, M3 Competition, M4, M4 Competition, M4 CSL\u003c\/li\u003e\n\u003cli\u003eIncludes B1 electronic damper-control module\u003c\/li\u003e\n\u003cli\u003e2WD (RWD) only\u003c\/li\u003e\n\u003cli\u003eAlso listed for 3 Series G20\/G28 and 4 Series G22 body codes\u003c\/li\u003e\n\u003cli\u003e-10 to -25 \/ -5 to -20 mm (coupe)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e other versions of this car, which have their own Bilstein EVO T2 part numbers: BMW M3 G80 RWD 20+; cars with factory electronic damping or self-levelling suspension unless stated above; other generations, body styles or drivetrains not listed above.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe factory dampers and springs are removed (spring compressors are needed to strip the original front struts) and the Bilstein units fitted in their place. Set the ride height equally side to side before fitting, tighten the lock rings, and never go below the minimum thread engagement given in Bilstein's instructions. Check that the wheels and tyres clear the arches and suspension at full lock and full compression. Let the springs settle, re-check the ride height, then have a four-wheel alignment carried out. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eWill this fit every BMW M3 G82?\u003c\/h3\u003e\n\u003cp\u003eNo. Bilstein makes separate kits for different versions of this car, split by body style, drivetrain, engine or axle load. This one is for the BMW M3 G80 G82 RWD (2020 onwards). Check the Fitment section and the Not suitable for line, and contact us with your registration if you're unsure.\u003c\/p\u003e\n\u003ch3\u003eHow low can I go?\u003c\/h3\u003e\n\u003cp\u003eAdjustable, up to approx. 70mm lower depending on the car. Always keep the minimum thread engagement shown in Bilstein's instructions and check that the tyres clear the arches at full lock and full compression.\u003c\/p\u003e\n\u003ch3\u003eHow does the damping adjustment work?\u003c\/h3\u003e\n\u003cp\u003eEach damper has two dials with 10 clicks each: one for rebound and one for bump. That gives 100 combinations. Change one dial a couple of clicks at a time and keep both sides of the car the same.\u003c\/p\u003e\n\u003ch3\u003eDo I need a wheel alignment after fitting?\u003c\/h3\u003e\n\u003cp\u003eYes. Changing the ride height changes the suspension geometry, so a four-wheel alignment is needed after fitting. Let the springs settle for a few hundred miles first and re-check the ride height.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal in the UK?\u003c\/h3\u003e\n\u003cp\u003eYes, this kit is designed for road use. As with any suspension modification, you should tell your insurer once it has been fitted.\u003c\/p\u003e\n\u003ch3\u003eWhat type of dampers does it use?\u003c\/h3\u003e\n\u003cp\u003eMix of twin-tube and monotube gas-pressure (varies by axle), according to Bilstein's data for this part number. Gas-pressure dampers resist fading when they get hot during hard driving.\u003c\/p\u003e\n\u003ch3\u003eIs there a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes. Bilstein suspension is covered against defects in materials and workmanship. Contact us with your order number if you have any problem.\u003c\/p\u003e\n\u003ch3\u003eDo I need new top mounts?\u003c\/h3\u003e\n\u003cp\u003eThey are not included. If your existing top mounts, bearings or bump stops are worn, replace them while the suspension is apart, as worn mounts can cause knocks and affect the alignment.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":58919116439935,"sku":"48-808287","price":3313.44,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6251\/6693\/files\/bilstein-evo-t2_cf9e15eb-9c61-436f-a382-38f0963e0acf.jpg?v=1792763669","url":"https:\/\/coilovers.co.uk\/products\/bilstein-evo-t2-coilovers-bmw-m3-g80-g82-rwd-20","provider":"Coilovers.co.uk","version":"1.0","type":"link"}