{"product_id":"bilstein-evo-t1-coilovers-bmw-3-series-g20-xdrive-18","title":"Bilstein Evo T1 Coilovers BMW 3-Series G20 xDrive 18+","description":"\u003ch2\u003eBilstein EVO T1 Coilovers for BMW 3-Series G20 xDrive (2018 onwards) – Height Adjustable with 10-Click Damping\u003c\/h2\u003e\n\u003cp\u003eBilstein EVO T1 coilovers bring adjustable ride height and adjustable damping to the BMW 3-Series G20 xDrive. The threaded bodies allow up to approx. 70mm of lowering, depending on the car, and a 10-click aluminium dial on each damper sets how firm it rides.\u003c\/p\u003e\n\u003cp\u003eEach click adjusts rebound and bump together, so changing the setup between road and track is quick, and it can be done with the coilovers fitted. EVO T1 suits drivers who do regular track days but still use the car on the road.\u003c\/p\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRide height:\u003c\/strong\u003e Adjustable, up to approx. 70mm lower depending on the car\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping:\u003c\/strong\u003e 10-click adjustable (rebound and bump together)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamper design:\u003c\/strong\u003e Mix of twin-tube and monotube gas-pressure (varies by axle)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRide-height figures are Bilstein's application data for this part number, measured against the car's standard ride height. The actual change depends on the car's engine, equipment and the condition of the parts being replaced.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHeight-adjustable threaded bodies, up to approx. 70mm lower\u003c\/li\u003e\n\u003cli\u003e10-click aluminium dial adjusts rebound and bump together\u003c\/li\u003e\n\u003cli\u003eDamping can be changed with the coilovers fitted\u003c\/li\u003e\n\u003cli\u003eSet softer for the road and firmer for the track\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested by Bilstein for this specific car\u003c\/li\u003e\n\u003cli\u003eComplete matched kit of dampers and springs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2 x front Bilstein EVO T1 height-adjustable coilover units with damping adjuster\u003c\/li\u003e\n\u003cli\u003e2 x rear Bilstein EVO T1 adjustable dampers with springs (layout follows the car's original rear suspension)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e the photo shows a typical Bilstein EVO T1 kit. The parts for your car are specific to it and will differ in appearance. Top mounts and fitting hardware are not included unless listed above.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW 3-Series G20 xDrive (2018 onwards)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e other versions of this car, which have their own Bilstein EVO T1 part numbers: BMW 3-Series 330e G20 xDrive 18+, BMW 3-Series G20 RWD 18+, BMW 3-Series G20 RWD 18+; cars with factory electronic damping or self-levelling suspension unless stated above; other generations, body styles or drivetrains not listed above.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe factory dampers and springs are removed (spring compressors are needed to strip the original front struts) and the Bilstein units fitted in their place. Set the ride height equally side to side before fitting, tighten the lock rings, and never go below the minimum thread engagement given in Bilstein's instructions. Check that the wheels and tyres clear the arches and suspension at full lock and full compression. Let the springs settle, re-check the ride height, then have a four-wheel alignment carried out. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cp\u003eBilstein also makes other suspension options for this car: Bilstein EVO R for the BMW 3-Series G20 RWD 18+.\u003c\/p\u003e\n\u003ch3\u003eWill this fit every BMW 3-Series G20?\u003c\/h3\u003e\n\u003cp\u003eNo. Bilstein makes separate kits for different versions of this car, split by body style, drivetrain, engine or axle load. This one is for the BMW 3-Series G20 xDrive (2018 onwards). Check the Fitment section and the Not suitable for line, and contact us with your registration if you're unsure.\u003c\/p\u003e\n\u003ch3\u003eHow low can I go?\u003c\/h3\u003e\n\u003cp\u003eAdjustable, up to approx. 70mm lower depending on the car. Always keep the minimum thread engagement shown in Bilstein's instructions and check that the tyres clear the arches at full lock and full compression.\u003c\/p\u003e\n\u003ch3\u003eCan I adjust the damping once fitted?\u003c\/h3\u003e\n\u003cp\u003eYes. The adjuster on each damper can be turned with the coilovers fitted, and one adjuster changes rebound and bump together. Start in the middle and go firmer or softer a few clicks at a time.\u003c\/p\u003e\n\u003ch3\u003eDo I need a wheel alignment after fitting?\u003c\/h3\u003e\n\u003cp\u003eYes. Changing the ride height changes the suspension geometry, so a four-wheel alignment is needed after fitting. Let the springs settle for a few hundred miles first and re-check the ride height.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal in the UK?\u003c\/h3\u003e\n\u003cp\u003eYes, this kit is designed for road use. As with any suspension modification, you should tell your insurer once it has been fitted.\u003c\/p\u003e\n\u003ch3\u003eWhat type of dampers does it use?\u003c\/h3\u003e\n\u003cp\u003eMix of twin-tube and monotube gas-pressure (varies by axle), according to Bilstein's data for this part number. Gas-pressure dampers resist fading when they get hot during hard driving.\u003c\/p\u003e\n\u003ch3\u003eIs there a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes. Bilstein suspension is covered against defects in materials and workmanship. Contact us with your order number if you have any problem.\u003c\/p\u003e\n\u003ch3\u003eDo I need new top mounts?\u003c\/h3\u003e\n\u003cp\u003eThey are not included. If your existing top mounts, bearings or bump stops are worn, replace them while the suspension is apart, as worn mounts can cause knocks and affect the alignment.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":58919113589119,"sku":"48-304979","price":1869.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6251\/6693\/files\/bilstein-evo-t1_b054044b-6d2d-4878-aaf3-d05033ddcbca.jpg?v=1792763659","url":"https:\/\/coilovers.co.uk\/products\/bilstein-evo-t1-coilovers-bmw-3-series-g20-xdrive-18","provider":"Coilovers.co.uk","version":"1.0","type":"link"}