{"product_id":"bilstein-evo-se-coilovers-volkswagen-id-4-e21-20","title":"Bilstein Evo SE Coilovers Volkswagen ID.4 E21 20+","description":"\u003ch2\u003eBilstein EVO SE Coilovers for Volkswagen ID.4 E21 (2020 onwards) – Height Adjustable While Keeping Electronic Damping\u003c\/h2\u003e\n\u003cp\u003eBilstein EVO SE coilovers are for versions of the Volkswagen ID.4 E21 with factory electronic damper control. They add height-adjustable threaded bodies, up to approx. 70mm lower depending on the car, and connect straight into the car's own damper control.\u003c\/p\u003e\n\u003cp\u003eBecause the car carries on managing the dampers, the electronic damping stays active after fitting. You get the stance and body control of a coilover without giving up the comfort and versatility of the factory adaptive system.\u003c\/p\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRide height:\u003c\/strong\u003e Adjustable, up to approx. 70mm lower depending on the car\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping:\u003c\/strong\u003e Electronically controlled by the car\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamper design:\u003c\/strong\u003e Twin-tube gas-pressure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRide-height figures are Bilstein's application data for this part number, measured against the car's standard ride height. The actual change depends on the car's engine, equipment and the condition of the parts being replaced.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHeight-adjustable threaded bodies, up to approx. 70mm lower\u003c\/li\u003e\n\u003cli\u003ePlug-and-play connection to the car's electronic damper control\u003c\/li\u003e\n\u003cli\u003eKeeps the electronic damping working after fitting\u003c\/li\u003e\n\u003cli\u003eMore body control than the standard adaptive suspension\u003c\/li\u003e\n\u003cli\u003eDeveloped with lab simulation and road testing\u003c\/li\u003e\n\u003cli\u003eComplete matched kit of dampers and springs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2 x front Bilstein EVO SE height-adjustable coilover units with electronic damping\u003c\/li\u003e\n\u003cli\u003e2 x rear Bilstein EVO SE electronic dampers with springs (layout follows the car's original rear suspension)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e the photo shows a typical Bilstein EVO SE kit. The parts for your car are specific to it and will differ in appearance. Top mounts and fitting hardware are not included unless listed above.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVolkswagen ID.4 E21 (2020 onwards)\u003c\/li\u003e\n\u003cli\u003eCoilover kit\u003c\/li\u003e\n\u003cli\u003eRWD (rear-wheel-drive, single-motor) models\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e cars without factory electronic damper control; other generations, body styles or drivetrains not listed above.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe factory dampers and springs are removed (spring compressors are needed to strip the original front struts) and the Bilstein units fitted in their place, with the damper connectors plugged into the car's harness. Set the ride height equally side to side, tighten the lock rings and never go below the minimum thread engagement in Bilstein's instructions. Check wheel and tyre clearance at full lock and full compression, let the springs settle, re-check the height and have a four-wheel alignment carried out. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eHow do I check this fits my Volkswagen ID.4?\u003c\/h3\u003e\n\u003cp\u003eThis kit is for the Volkswagen ID.4 E21 (2020 onwards). Check the details in the Fitment section, and if you're unsure, send us your registration or VIN and we'll confirm before you order.\u003c\/p\u003e\n\u003ch3\u003eHow low can I go?\u003c\/h3\u003e\n\u003cp\u003eAdjustable, up to approx. 70mm lower depending on the car. Always keep the minimum thread engagement shown in Bilstein's instructions and check that the tyres clear the arches at full lock and full compression.\u003c\/p\u003e\n\u003ch3\u003eWill my car's adaptive damping still work?\u003c\/h3\u003e\n\u003cp\u003eYes. This kit connects to the car's own electronic damper control, so the system keeps adjusting the dampers as before. It is only for cars that came with electronic damping from the factory.\u003c\/p\u003e\n\u003ch3\u003eDo I need a wheel alignment after fitting?\u003c\/h3\u003e\n\u003cp\u003eYes. Changing the ride height changes the suspension geometry, so a four-wheel alignment is needed after fitting. Let the springs settle for a few hundred miles first and re-check the ride height.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal in the UK?\u003c\/h3\u003e\n\u003cp\u003eYes, this kit is designed for road use. As with any suspension modification, you should tell your insurer once it has been fitted.\u003c\/p\u003e\n\u003ch3\u003eWhat type of dampers does it use?\u003c\/h3\u003e\n\u003cp\u003eTwin-tube gas-pressure, according to Bilstein's data for this part number. Gas-pressure dampers resist fading when they get hot during hard driving.\u003c\/p\u003e\n\u003ch3\u003eIs there a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes. Bilstein suspension is covered against defects in materials and workmanship. Contact us with your order number if you have any problem.\u003c\/p\u003e\n\u003ch3\u003eDo I need new top mounts?\u003c\/h3\u003e\n\u003cp\u003eThey are not included. If your existing top mounts, bearings or bump stops are worn, replace them while the suspension is apart, as worn mounts can cause knocks and affect the alignment.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":58919107854719,"sku":"49-349733","price":2408.82,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6251\/6693\/files\/bilstein-evo-se_83919cb6-152f-436e-9449-bbe1563a64bf.jpg?v=1792763642","url":"https:\/\/coilovers.co.uk\/products\/bilstein-evo-se-coilovers-volkswagen-id-4-e21-20","provider":"Coilovers.co.uk","version":"1.0","type":"link"}