{"product_id":"bilstein-evo-s-coilovers-mercedes-benz-a-class-w177-torsion-beam-18","title":"Bilstein Evo S Coilovers Mercedes-Benz A-Class W177 Torsion Beam 18+","description":"\u003ch2\u003eBilstein EVO S Coilovers for Mercedes-Benz A-Class W177 Torsion Beam (2018 onwards) – Height Adjustable up to 70mm, Street Focused\u003c\/h2\u003e\n\u003cp\u003eBilstein EVO S coilovers give the Mercedes-Benz A-Class W177 Torsion Beam a height-adjustable suspension aimed at fast road driving. The threaded bodies let you lower the car by up to approx. 70mm, depending on the car, and set it exactly where you want it, with threads left to spare.\u003c\/p\u003e\n\u003cp\u003eThe damping is fixed and tuned by Bilstein using both lab simulation and road testing, so it rides with more control than standard while staying comfortable enough for everyday use. There are no damping settings to adjust, which keeps setup simple.\u003c\/p\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRide height:\u003c\/strong\u003e Adjustable, up to approx. 70mm lower depending on the car\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping:\u003c\/strong\u003e Fixed, tuned by Bilstein for this car\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamper design:\u003c\/strong\u003e Mix of twin-tube and monotube gas-pressure (varies by axle)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRide-height figures are Bilstein's application data for this part number, measured against the car's standard ride height. The actual change depends on the car's engine, equipment and the condition of the parts being replaced.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHeight-adjustable threaded bodies, up to approx. 70mm lower\u003c\/li\u003e\n\u003cli\u003eFixed damping tuned for fast road driving\u003c\/li\u003e\n\u003cli\u003eMore body control than standard without a harsh ride\u003c\/li\u003e\n\u003cli\u003eDeveloped with lab simulation and road testing\u003c\/li\u003e\n\u003cli\u003eComplete matched kit of dampers and springs\u003c\/li\u003e\n\u003cli\u003eSupplied with technical certification\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2 x front Bilstein EVO S height-adjustable coilover units\u003c\/li\u003e\n\u003cli\u003e2 x rear Bilstein EVO S dampers with springs (layout follows the car's original rear suspension)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e the photo shows a typical Bilstein EVO S kit. The parts for your car are specific to it and will differ in appearance. Top mounts and fitting hardware are not included unless listed above.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMercedes-Benz A-Class W177 Torsion Beam (2018 onwards)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e other versions of this car, which have their own Bilstein EVO S part numbers: Mercedes-Benz A-Class W177 Multilink Axle 18+; cars with factory electronic damping unless stated above; other generations, body styles or drivetrains not listed above.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe factory dampers and springs are removed (spring compressors are needed to strip the original front struts) and the Bilstein units fitted in their place. Set the ride height equally side to side before fitting, tighten the lock rings, and never go below the minimum thread engagement given in Bilstein's instructions. Check that the wheels and tyres clear the arches and suspension at full lock and full compression. Let the springs settle, re-check the ride height, then have a four-wheel alignment carried out. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eWill this fit every Mercedes-Benz A-Class W177?\u003c\/h3\u003e\n\u003cp\u003eNo. Bilstein makes separate kits for different versions of this car, split by body style, drivetrain, engine or axle load. This one is for the Mercedes-Benz A-Class W177 Torsion Beam (2018 onwards). Check the Fitment section and the Not suitable for line, and contact us with your registration if you're unsure.\u003c\/p\u003e\n\u003ch3\u003eHow low can I go?\u003c\/h3\u003e\n\u003cp\u003eAdjustable, up to approx. 70mm lower depending on the car. Always keep the minimum thread engagement shown in Bilstein's instructions and check that the tyres clear the arches at full lock and full compression.\u003c\/p\u003e\n\u003ch3\u003eCan I fit this to a car with electronic or adaptive dampers?\u003c\/h3\u003e\n\u003cp\u003eThis kit uses conventional dampers. If your car has factory electronic damping, check the Fitment notes above, as Bilstein makes separate DampTronic and EVO SE kits for many of these cars.\u003c\/p\u003e\n\u003ch3\u003eDo I need a wheel alignment after fitting?\u003c\/h3\u003e\n\u003cp\u003eYes. Changing the ride height changes the suspension geometry, so a four-wheel alignment is needed after fitting. Let the springs settle for a few hundred miles first and re-check the ride height.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal in the UK?\u003c\/h3\u003e\n\u003cp\u003eYes, this kit is designed for road use. As with any suspension modification, you should tell your insurer once it has been fitted.\u003c\/p\u003e\n\u003ch3\u003eWhat type of dampers does it use?\u003c\/h3\u003e\n\u003cp\u003eMix of twin-tube and monotube gas-pressure (varies by axle), according to Bilstein's data for this part number. Gas-pressure dampers resist fading when they get hot during hard driving.\u003c\/p\u003e\n\u003ch3\u003eIs there a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes. Bilstein suspension is covered against defects in materials and workmanship. Contact us with your order number if you have any problem.\u003c\/p\u003e\n\u003ch3\u003eDo I need new top mounts?\u003c\/h3\u003e\n\u003cp\u003eThey are not included. If your existing top mounts, bearings or bump stops are worn, replace them while the suspension is apart, as worn mounts can cause knocks and affect the alignment.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":58919091306879,"sku":"47-313798","price":1297.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6251\/6693\/files\/bilstein-evo-s_00134bb1-6e32-475a-874d-8e8c87adc30f.jpg?v=1792763557","url":"https:\/\/coilovers.co.uk\/products\/bilstein-evo-s-coilovers-mercedes-benz-a-class-w177-torsion-beam-18","provider":"Coilovers.co.uk","version":"1.0","type":"link"}