{"product_id":"bilstein-b12-sportline-coilovers-vauxhall-corsa-e-1-0-1-4-14-19","title":"Bilstein B12 SportLine Coilovers Vauxhall Corsa E 1.0-1.4 14-19","description":"\u003ch2\u003eBilstein B12 Sportline Suspension Kit for Vauxhall Corsa E 1.0-1.4 (2014-2019) – Deeper Drop and Sportier Handling\u003c\/h2\u003e\n\u003cp\u003eThe Bilstein B12 Sportline is the lower, sportier of Bilstein's two B12 lowering kits for the Vauxhall Corsa E 1.0-1.4. It replaces all four dampers and springs with shortened Bilstein B8 performance dampers and Eibach Sportline springs, giving a more aggressive stance and firmer body control than the B12 Pro-Kit.\u003c\/p\u003e\n\u003cp\u003eThe dampers are shortened to match the lower spring height, so they keep enough stroke to work properly even with the deeper drop. Everything is developed for this car and fits in place of the factory parts, so there is no cutting or modification to the car.\u003c\/p\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRide height:\u003c\/strong\u003e Fixed lowering, deeper than the B12 Pro-Kit (up to approx. 50mm depending on the car)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping:\u003c\/strong\u003e Fixed, tuned for this car\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamper design:\u003c\/strong\u003e Monotube gas-pressure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRide-height figures are Bilstein's application data for this part number, measured against the car's standard ride height. The actual change depends on the car's engine, equipment and the condition of the parts being replaced.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBilstein B8 shortened performance dampers paired with Eibach Sportline springs\u003c\/li\u003e\n\u003cli\u003eDeeper drop than the B12 Pro-Kit for a more purposeful stance\u003c\/li\u003e\n\u003cli\u003eFirmer body control and less roll through corners\u003c\/li\u003e\n\u003cli\u003eDampers and springs developed and tested together for this application\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the factory parts: no cutting or drilling\u003c\/li\u003e\n\u003cli\u003eSprings supplied with a parts certificate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2 x front Bilstein dampers (strut or strut insert, as the car requires)\u003c\/li\u003e\n\u003cli\u003e2 x rear Bilstein dampers\u003c\/li\u003e\n\u003cli\u003e2 x front Eibach Sportline lowering springs\u003c\/li\u003e\n\u003cli\u003e2 x rear Eibach Sportline lowering springs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e the photo shows a typical Bilstein B12 kit. The parts for your car are specific to it and will differ in appearance. Top mounts and fitting hardware are not included unless listed above.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVauxhall Corsa E 1.0-1.4 (2014-2019)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e other versions of this car, which have their own Bilstein B12 Sportline part numbers: Vauxhall Corsa E 1.4 1.3 CDTi 1.7 CDTi 14-19; cars with factory electronic damping or self-levelling suspension unless stated above; other generations, body styles or drivetrains not listed above.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eFitting replaces the dampers and springs at all four corners. Where the car has front struts, they must be dismantled with spring compressors to swap the springs, and where the car uses a strut insert the cartridge cap nut is tightened to 130 Nm with the Bilstein cartridge tool. Check the top mounts, bearings, bump stops and dust covers while everything is apart and replace any that are worn. Let the springs settle for a few hundred miles, then have a four-wheel alignment carried out and check the headlight aim. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eWill this fit every Vauxhall Corsa 1.0-1.4?\u003c\/h3\u003e\n\u003cp\u003eNo. Bilstein makes separate kits for different versions of this car, split by body style, drivetrain, engine or axle load. This one is for the Vauxhall Corsa E 1.0-1.4 (2014-2019). Check the Fitment section and the Not suitable for line, and contact us with your registration if you're unsure.\u003c\/p\u003e\n\u003ch3\u003eHow much lower will my car sit?\u003c\/h3\u003e\n\u003cp\u003eBilstein doesn't list an exact figure for this part in our data. Across the range the drop is fixed lowering, deeper than the B12 Pro-Kit (up to approx. 50mm depending on the car); contact us and we'll check the figure for your car.\u003c\/p\u003e\n\u003ch3\u003eIs the ride height adjustable?\u003c\/h3\u003e\n\u003cp\u003eNo. The B12 gives a fixed drop set by the springs. If you want to set the height yourself, look at Bilstein's B14 or B16 coilovers for your car.\u003c\/p\u003e\n\u003ch3\u003eCan I fit this to a car with electronic or adaptive dampers?\u003c\/h3\u003e\n\u003cp\u003eThis kit uses conventional dampers. If your car has factory electronic damping, check the Fitment notes above, as Bilstein makes separate DampTronic and EVO SE kits for many of these cars.\u003c\/p\u003e\n\u003ch3\u003eDo I need a wheel alignment after fitting?\u003c\/h3\u003e\n\u003cp\u003eYes. Changing the ride height changes the suspension geometry, so a four-wheel alignment is needed after fitting. Let the springs settle for a few hundred miles first.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal in the UK?\u003c\/h3\u003e\n\u003cp\u003eYes, this kit is designed for road use. As with any suspension modification, you should tell your insurer once it has been fitted.\u003c\/p\u003e\n\u003ch3\u003eWhat's the difference between the B12 Pro-Kit and B12 Sportline?\u003c\/h3\u003e\n\u003cp\u003eBoth pair Bilstein dampers with Eibach springs. The Pro-Kit gives a moderate drop for everyday comfort; the Sportline sits lower and feels firmer. Not every car has both versions available.\u003c\/p\u003e\n\u003ch3\u003eWhat type of dampers does it use?\u003c\/h3\u003e\n\u003cp\u003eMonotube gas-pressure, according to Bilstein's data for this part number. Gas-pressure dampers resist fading when they get hot during hard driving.\u003c\/p\u003e\n\u003ch3\u003eIs there a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes. Bilstein suspension is covered against defects in materials and workmanship. Contact us with your order number if you have any problem.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":58918979076479,"sku":"46-260857-1","price":1002.06,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6251\/6693\/files\/bilstein-b12_85d23661-30df-4f32-b510-b0575ce13954.jpg?v=1792762823","url":"https:\/\/coilovers.co.uk\/products\/bilstein-b12-sportline-coilovers-vauxhall-corsa-e-1-0-1-4-14-19","provider":"Coilovers.co.uk","version":"1.0","type":"link"}