{"product_id":"bilstein-b12-pro-lift-kit-coilovers-jeep-renegade-bu-4wd-14","title":"Bilstein B12 Pro-Lift Kit Coilovers Jeep Renegade BU 4WD 14+","description":"\u003ch2\u003eBilstein B12 Pro-Lift Kit for Jeep Renegade BU 4WD (2014 onwards) – Raised Ride Height and Extra Ground Clearance\u003c\/h2\u003e\n\u003cp\u003eThe Bilstein B12 Pro-Lift Kit raises the Jeep Renegade BU 4WD above its standard ride height. It replaces the factory dampers and springs with Bilstein dampers and matched Eibach lift springs, adding ground clearance for rough tracks, tow-hitch use or simply a more rugged look.\u003c\/p\u003e\n\u003cp\u003eBecause the dampers are matched to the taller springs, the car keeps proper damping control instead of feeling floaty, as it would with spacers or lift springs alone. The kit is developed for this car and fits in place of the factory parts.\u003c\/p\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRide height:\u003c\/strong\u003e Raises the car (see Performance)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping:\u003c\/strong\u003e Fixed, tuned for this car\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamper design:\u003c\/strong\u003e Twin-tube gas-pressure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRide-height figures are Bilstein's application data for this part number, measured against the car's standard ride height. The actual change depends on the car's engine, equipment and the condition of the parts being replaced.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRaises ride height for extra ground clearance\u003c\/li\u003e\n\u003cli\u003eBilstein dampers matched to Eibach lift springs\u003c\/li\u003e\n\u003cli\u003eKeeps controlled, predictable handling on the road\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested for this specific car\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the factory parts: no cutting or drilling\u003c\/li\u003e\n\u003cli\u003eSprings supplied with a parts certificate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2 x front Bilstein dampers\u003c\/li\u003e\n\u003cli\u003e2 x rear Bilstein dampers\u003c\/li\u003e\n\u003cli\u003e2 x front Eibach lift springs\u003c\/li\u003e\n\u003cli\u003e2 x rear Eibach lift springs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e the photo shows a typical Bilstein B12 kit. The parts for your car are specific to it and will differ in appearance. Top mounts and fitting hardware are not included unless listed above.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJeep Renegade BU 4WD (2014 onwards)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e cars with factory electronic damping or self-levelling suspension unless stated above; other generations, body styles or drivetrains not listed above.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eFitting replaces the dampers and springs at all four corners. Where the car has front struts, they must be dismantled with spring compressors to swap the springs. Check the top mounts, bearings and bump stops while everything is apart and replace any that are worn. Because the car sits higher, a four-wheel alignment is essential after fitting, and the headlight aim should be checked. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eHow do I check this fits my Jeep Renegade?\u003c\/h3\u003e\n\u003cp\u003eThis kit is for the Jeep Renegade BU 4WD (2014 onwards). Check the details in the Fitment section, and if you're unsure, send us your registration or VIN and we'll confirm before you order.\u003c\/p\u003e\n\u003ch3\u003eHow much will it raise my car?\u003c\/h3\u003e\n\u003cp\u003eBilstein doesn't list an exact lift figure for this part in our data. Contact us and we'll check the figure for your car.\u003c\/p\u003e\n\u003ch3\u003eCan I fit this to a car with electronic or adaptive dampers?\u003c\/h3\u003e\n\u003cp\u003eThis kit uses conventional dampers. If your car has factory electronic damping, check the Fitment notes above, as Bilstein makes separate DampTronic and EVO SE kits for many of these cars.\u003c\/p\u003e\n\u003ch3\u003eDo I need a wheel alignment after fitting?\u003c\/h3\u003e\n\u003cp\u003eYes. Changing the ride height changes the suspension geometry, so a four-wheel alignment is needed after fitting. Let the springs settle for a few hundred miles first.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal in the UK?\u003c\/h3\u003e\n\u003cp\u003eYes, this kit is designed for road use. As with any suspension modification, you should tell your insurer once it has been fitted.\u003c\/p\u003e\n\u003ch3\u003eWhat type of dampers does it use?\u003c\/h3\u003e\n\u003cp\u003eTwin-tube gas-pressure, according to Bilstein's data for this part number. Gas-pressure dampers resist fading when they get hot during hard driving.\u003c\/p\u003e\n\u003ch3\u003eIs there a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes. Bilstein suspension is covered against defects in materials and workmanship. Contact us with your order number if you have any problem.\u003c\/p\u003e\n\u003ch3\u003eDo I need new top mounts?\u003c\/h3\u003e\n\u003cp\u003eThey are not included. If your existing top mounts, bearings or bump stops are worn, replace them while the suspension is apart, as worn mounts can cause knocks and affect the alignment.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":58918903185791,"sku":"46-280343","price":1113.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6251\/6693\/files\/bilstein-b12_c4219fdd-1db3-408a-8fbb-f580e440ce34.jpg?v=1792762494","url":"https:\/\/coilovers.co.uk\/products\/bilstein-b12-pro-lift-kit-coilovers-jeep-renegade-bu-4wd-14","provider":"Coilovers.co.uk","version":"1.0","type":"link"}